Ground Clearance of Toyota C-HR with Body Kit
The ground clearance of the Toyota C-HR with a body kit is 5.9 inches.
This compact crossover SUV has a ground clearance of 5.9 inches, which represents the height of the underbody of the car in relation to the ground.
The ground clearance remains consistent across all model years, including the 2022 Toyota C-HR.
Contents
- Is the Toyota C-HR bigger than the RAV4?
- What is the ride height of a C-HR?
- How does Toyota measure ground clearance?
- What is the disadvantage of Toyota C-HR?
- What is suspension ride height?
- What is the ground clearance of Toyota C-HR with body kit?
- How tall is the Toyota C-HR from the ground?
- Why are they discontinuing the Toyota C-HR?
- What is the ground clearance of a Toyota C-HR?
- What does C-HR stand for in Toyota C-HR?
Is the Toyota C-HR bigger than the RAV4?
Toyota RAV4 size is important, as the amount of gear you can fit inside may influence your decision. Standard Cargo Volume: The CH-R holds 19.1 cubic feet of cargo with all seats occupied, and the RAV4 has a cargo volume of 37.6 cubic feet with all seats occupied.
What is the ride height of a C-HR?
The height, measured from the ground to the top of the car, is 1565 mm across all variants. The width is 1795 mm across all variants. The length is 4390 mm across all variants.
How does Toyota measure ground clearance?
Finally there’s ground clearance. This is the measurement of distance between the ground and the lowest point of the vehicle.
What is the disadvantage of Toyota C-HR?
The C-HR’s bold, coupé-esque styling has won it a lot of fans, plus its hybrid powertrain returns impressive fuel economy. What is the disadvantage of Toyota C-HR? The C-HR isn’t very practical compared with many similarly priced small SUVs due to its cramped rear seats and so-so boot.
What is suspension ride height?
A suspension’s ride height is defined as the distance from the suspension mounting surface (the bottom of the trailer or slider box) to the center of the axle (Figure 6) with air in the air springs. measure the distance between the axle and the mounting surface of the suspension.
What is the ground clearance of Toyota C-HR with body kit?
C-HR GR Sport adopts sharper driving dynamics with revised suspension components that lower the car by 15mm overall to 1550mm. It also sits 12mm closer to the ground with a running ground clearance of 125mm.
How tall is the Toyota C-HR from the ground?
1558 mm to 1565 mm
The height, measured from the ground to the top of the car, ranges from 1558 mm to 1565 mm depending on the variant.
Why are they discontinuing the Toyota C-HR?
Not efficient. Even under the careful tutelage of the greater Toyota brand, the C-HR didn’t quite fit in. It’s almost like Toyota made the exact opposite of what people actually wanted. It was shaped like an SUV (mostly) but it didn’t do anything an SUV should do.
What is the ground clearance of a Toyota C-HR?
5 in
GR-S (2WD) Hybrid, 1.8L, Unleaded Petrol/Electric, SPEED CONTINUOUS VARIABLE
| Dimension | Metric | Imperial |
|---|---|---|
| Toyota C-HR Ground clearance unladen | 137 mm | 5 in |
| Toyota C-HR Wheelbase | 2640 mm | 8 ft 8 in |
| Toyota C-HR Weight | 1420 kg | 3131 lbs |
| Toyota C-HR Turning circle | 10.40 m | 34 ft 1 in |
What does C-HR stand for in Toyota C-HR?
Compact High Rider
The mysterious “C-HR” moniker is an acronym. According to the official Toyota press release, the name C-HR is “derived from Compact High Rider and Cross Hatch Run-about.” The idea of a “compact high rider” makes sense. “Compact” is self-explanatory; the C-HR is—dimensions-wise—a small crossover SUV.
