What is the gear ratio of a Toyota 86?

Gear Ratio of Toyota 86
The gear ratio of the Toyota 86 varies depending on the model and transmission type. For the 2021 Toyota 86, it had the following gearbox options: 6-speed Manual Close-Ratio TL70 and 6-speed Automatic Electronically Controlled.
The gear ratio is an important factor in determining the performance and efficiency of a vehicle. It affects the acceleration, top speed, and fuel economy. The specific gear ratios for the Toyota 86 can be found in the technical specifications provided by the manufacturer or in the vehicle’s user manual.
If you need more detailed information about the gear ratios for a specific model or transmission type of the Toyota 86, I recommend consulting the official technical specifications from Toyota or contacting a certified Toyota dealership for accurate and up-to-date information.
If you have any other questions or need further assistance, feel free to ask!

At what RPM does the BRZ make its peak?

But these numbers only tell part of the story. While the outgoing 2.0-liter mill needed to be wound out to 6,400 rpm to reach its peak torque figure, the 2.4 liter does so at just 3,700 rpm, in turn providing the second-generation BRZ with significantly more low-end grunt.

What gear ratio is faster?

On the other hand, a (numerically) higher gear ratio, such as 4.56:1, will offer faster acceleration but with lower fuel efficiency. If you’re looking to improve acceleration, a numerically higher gear ratio is the way to go.

What is the gear ratio for each gear?

To calculate this ratio you take the # of teeth on the gears on the motor and then divide that by the # of teeth on the gear that you a driving with the motor and small gear so in your case this 40 tooth gear. This should give you a number of . 25 which means you have a gear ration of 4:1.

What does 3.9 gear ratio mean?

Technically, ratios should be written as 3.90:1 , which means the driveline turns 3.9 times for every one turn of the wheels. So, the lower the axle ratio, the faster the truck will move. An axle’s ratio is determined by the number of teeth on the ring gear and the pinion gear.

How do I know what gear ratio I have?

Turn your wheel one time. While you’re turning it one time, count the number of rotations on your drive shaft. That will determine your gear ratio. In my case it rotated about four and a half times and my gear ratio is 4.56, so I know this test works spot-on.

What is the gear ratio of the GR86 auto?

Transmission

Fifth Gear Ratio (:1)	1.00
First Gear Ratio (:1)	3.63
Drivetrain	Rear Wheel Drive
Reverse Ratio (:1)	3.44
Final Drive Axle Ratio (:1)	4.10

What is the final drive ratio for the BRZ?

Final Drive gear for the Subaru BRZ & Scion FRS come in 4.43 or 4.68 final ratio which is suitable for users who plan to keep their Subaru BRZ / Scion FRS naturally aspirated. The higher the final gear ratio over stock will increase the wheel torque across all RPM range.

Is a higher final drive ratio better?

How can changing the final drive ratio make a car faster? It depends on what your definition of “faster” is. If you want faster acceleration, you need a higher ratio rear end, but your top speed will decrease. If you wantva higher top speed, you need a lower ratio rear end, but your rate of acceleration will decrease.

What gear ratio for GT 86?

	ZN6-ALE8 HIGH MT	ZN6-ALB8 STD MT
Transmission gear ratio 1st	3626	3626
Transmission gear ratio 2nd	2188	2188
Transmission gear ratio 3rd	1541	1541
Transmission gear ratio 4th	1213	1213

What is the axle ratio of an AE86?

4.3 ratio
Stock AE86 axle has a 4.3 ratio which is a very good overall compromise and you can go to 13″ wheels for quicker gearing or 14’s for more range.