What is the gear ratio of a Ford f150?

Gear Ratio of Ford F150
The gear ratio of a Ford F150 can be determined by locating the “Vehicle Certification Plate” on the inside of the driver’s door near the door latch. The axle code is printed under “Axle” or “Ax.” You can use the chart provided to cross-reference the axle code and write down the number in the lower left-hand corner of the tag, which will indicate the gear ratio. For instance, it may look like “3.23” or “3.50”.
Different gear ratios have different characteristics. Lower (numerically higher) gears are better for pulling and acceleration, while higher (numerically lower) gears are better for highway driving. The gear ratio for a specific Ford F150 can vary based on the model and year, and it’s essential to verify the specific gear ratio for a particular vehicle.
If you have a specific Ford F150 model and year in mind, you can provide that information for a more precise gear ratio determination.

How do I know what gear ratio my truck has?

Check the Differential Cover
The axle may have a sticker, and on the differential cover, you might have a small metal tag that’s sticking out that will have the gear ratio stamped on it.

What axle does my F-150 have?

Mustangs, F150’s and other Fords can have their axle ratio easily identified by reading the sticker on the inside of the driver’s side door jamb.

What is the difference between 3.73 and 4.10 gear ratio?

What is the difference between a 3.73 and a 4.10 axle ratio? 4.10 gears will give you more toque for pulling at lower speeds, as it is lower geared, but it does cost you in fuel efficiency. I prefer 3.73, as it gives plenty of torque for pulling, but doesn’t cost you as much fuel mileage.

Can I get my gear ratio from VIN number?

The gear ratio in a car’s VIN number is easy. All you need to do is find the VDS part of the VIN. This is located between the fourth and eighth characters.

Is a 3.73 axle ratio good for towing?

The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.

What is the difference between 3.55 and 3.73 axle ratio?

1:3.73 is about 5% lower than 1:3.55. So if you change from 3.55 to 3.73 , you’re going 5% slower when you hit the same gear change – if you normally change first to second at 30 mph, now you change at 28.5 mph, second to third at 50 mph -> now at 47.5 mph, etc.

What is rear axle ratio for F-150?

It seems that it comes standard with the 3.31 rear axle ratio.

How do I know what differential my F150 has?

The most accurate differential identification is provided by the bottom line of the tag number or axle tube stamp. Differential tags can easily be used to identify Dana and Ford differentials.

Does VIN number tell gear ratio?

You don’t. That information is not contained in the VIN, UNLESS a specific model only gets one rear end ratio. VIN tells country of manufacture, vehicle make, class, engine type, size, date of manufacture, plant and serial number. That is the ONLY information contained by the VIN.

How do I find my F-150 gear ratio?

And then you’re going to count the the pinion. So do the same on the pinion. Just make a mark count we have 11 splines on the.