What is the gear ratio of a 6MT Subaru?

The gear ratio of a 6MT (6-speed manual transmission) Subaru can vary depending on the specific model and year. However, I found information on the gear ratios for the Subaru STi and Legacy Spec B, which are two vehicles that have received the 6MT transmission.
Here are the gear ratios for the Subaru STi 6MT:
– 1st gear: 3.785
– 2nd gear: 1.945
– 3rd gear: 1.500
– 4th gear: 0.994
– 5th gear: 0.780 (0.735 for WRX)
– 6th gear: Not specified
And here are the gear ratios for the Subaru Legacy Spec B 6MT:
– 1st gear: 3.785
– 2nd gear: 1.945
– 3rd gear: 1.500
– 4th gear: 0.994
– 5th gear: 0.780 (0.735 for WRX)
– 6th gear: Not specified
Please note that these gear ratios are specific to the STi and Legacy Spec B models and may not apply to all 6MT Subaru transmissions.

What is a 3.73 axle ratio good for?

The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.

What is the final drive ratio of a 2006 WRX?

The Nissan R180 rear differential out of the STI is a 3.90:1 final drive, while the 06 WRX has a 3.7:1 Nissan R160. The WRX has a unique gear set. The final drive for the front wheels is 3.90:1 while the rear is 3.7:1.

What does 6MT mean on a car?

6-speed Manual Transmission.

What does 355 gear ratio mean?

Technically, the number should be expressed as a ratio, such as 3.55:1, meaning the drive shaft turns 3.55 times for each turn of a wheel. But that gear ratio would most commonly be referred to as “3.55” or simply “three fifty-five.”

What is the diff ratio for a Subaru?

Subaru used 3.9:1, 4.111:1, 4.444:1 diff ratios and 1:1 and 1.1:1 drop gear ratios, mix them up and you will break something.

What gear ratio is a Subaru R180?

The ratios found in the R180s are 4.44 in version 4,5,6 Sti RAs and 3.9, 3.54 in the later GDB chassis STi’s (version 7 on).

What is difference between 6MT and CVT?

CVT (constant variable transmission) – infinite amount of gear ratios between two bordering conditions + reverse. Torque is transmitted by a flexible belt between two cones. Six-speed – six fixed forward gear ratios + reverse. The fact it is automatic says that it can either be a classic planetary gearset.

Is a 3.92 gear ratio good?

In short, yes. Which axle ratio you go with will affect your truck’s towing capability, but fuel economy will change too. A higher axle ratio (like the 3.92 we mentioned earlier) will allow for higher towing capability, but it requires higher engine rpm for any given speed and then results in lower fuel economy.

What is Subaru 6MT?

The 6MT WRX transmission is essentially the 5MT WRX transmission with an extra gear. That being said, the first and second gears feature carbon synchros. Definitely not the same as the 6MT STI transmission.

What gear ratio is a Subaru rear diff?

These gears are a multiplier only for the rear diff ratio. Subaru uses only 1.0 or 1.1 ratios for the transfer gears depending on the application. The 1.1 ratio has been used with certain applications using a 3.90 final drive ratio. With the 1.1 transfer ratio a 3.545 rear diff ratio is used (3.545 x 1.1 = 3.90).