What is the gear ratio for the Ford Ranger?

The gear ratio for the Ford Ranger can vary depending on the specific model and year. However, I found some information that can help you understand the gear ratios used in different Ford Ranger models.
According to the search results, the gear ratios for the Ford Ranger can range from 3.08 to 4.10. Here are some examples of gear ratios that have been used in different models:
– 1983-1988 6 3/4in Rears: 3.08, 3.45 (2WD only)
– 1983-2012 Ranger & B-Series: 3.08, 3.45, 3.73, 4.10
– 1989-1992 7.5 Rears: 3.08, 3.45, 3.73, 4.10
– 1989-1992 8.8 Rears: 3.08, 3.27, 3.55, 3.73
– Some late model 8.8″ Ranger rear axles are 31 spline.
It’s important to note that these are just examples, and the actual gear ratio for a specific Ford Ranger model can vary. To determine the exact gear ratio for your Ford Ranger, you can check the axle tag or the Federal Compliance Sticker in the door jamb. The axle tag will provide information about the gear ratio and axle size .
Please keep in mind that the gear ratio can have an impact on power, drivability, and fuel efficiency. If you are considering changing the tire size on your Ford Ranger, it’s recommended to consult a professional or refer to a gear ratio chart to select the optimum gear ratio for your desired performance.
I hope this information helps! Let me know if you have any other questions.

Where do I find my axle gear ratio?

Check the Differential Cover
The axle may have a sticker, and on the differential cover, you might have a small metal tag that’s sticking out that will have the gear ratio stamped on it.

Does Ford Ranger have diff lock?

Rear electronic differential lock is available in this mode. Don’t use this mode when driving on a hard-packed surface as you could damage your vehicle’s driveline. Baja3 (Ranger Raptor Only): This mode is designed for off-road performance.

What is the best gear ratio for a 4wd?

The ratios from first to fifth gear are 6.16, 3.11, 1.71, 1.00 and 0.76. The 6.16 ratio gives you acceleration for standing starts and torque for crawling or steep hills. The 0.76 ratio is ideal for highway cruising.

How do you know what gear ratio your Ford is?

Most Fords will be built with a specific set of available Axle Ratio options available from the factory. Mustangs, F150’s and other Fords can have their axle ratio easily identified by reading the sticker on the inside of the driver’s side door jamb.

What is the difference between 3.73 and 4.7 gear ratio?

The gear ratio is a torque multiplier, so you are multiplying torque by 3.73 or 4.7. You will have approximately 27% more torque with the 4.7, but that doesn’t help in mud/snow.

What is the best differential gear ratio?

The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy. This is a good ratio for the occasional towing or hauling individual. For a person who tows more often, and heavier loads, the 3:73 or 4:10 may be more appropriate. 2023 Ford Super Duty F-250 Tremor.

Is a 3.73 axle ratio good?

The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.

What is the front diff ratio of the Ford Ranger?

FORD RANGER DIFFERENTIAL CENTRE FRONT, 3.0, DIESEL, AUTO T/M, PJ-PK, 3.727 RATIO.

Should I get 3.73 or 4.10 gears?

There is only a 10% difference between 4.10 and 3.73 gears. Unless you need to tow heavy loads, I would keep the 3.73 gears. Or maybe if you are going to big, big tires. Otherwise you probably won’t notice the difference.

What is the axle ratio on a Ford Ranger?

Looking at that tag, you can see the gear ratio stamped on the lower left, and the axle size (ring gear diameter) stamped in the bottom middle. So looking at the axle tag above, you can see it’s a 3.73 gear ratio in a 7.5 inch axle.