What is the gear ratio for a 2013 Dodge Ram 1500?

Gear Ratio for a 2013 Dodge Ram 1500
The gear ratio options available for the 2013 Dodge Ram 1500 include the following:
– The standard rear end for the 1500 EcoDiesel is 3.55, and the 3.92 is an option across any of the 1500’s.
– The 3.21 non-limited slip axle ratio is standard across the line, with the exception of the Rebel, and the 3.55 is standard with the Pentastar V6.
– The lowest gear ratio offered for these trucks is 4.10, which comes on the r/t models.
It seems that the gear ratio options for the 2013 Dodge Ram 1500 include 3.21, 3.55, and 3.92, with the possibility of 4.10 for specific models. If you are looking to upgrade the gear ratio due to tire size, it’s important to consider the available options and their compatibility with your specific model.

Which RAM gear ratio is best?

So, to return to the same example, a Ram 1500 with the standard 3.21 axle ratio will get better fuel economy than a truck fitted with the 3.92. If towing isn’t your primary concern, the standard axle ratio is probably your best choice to balance towing capability and fuel economy.

How do I know my gear ratio?

The calculation uses the number of teeth in the ring gear and divides it by the number of teeth in the pinion gear to provide you with a “[result] to 1” ratio. For example, if the pinion gear has 41 teeth, and the ring gear has 11 teeth, the ratio would be calculated as 41/11, which is equal to 3.73 = 3.73:1.

What is better 3.21 or 3.92 axle ratio?

The standard 3.21 axle ratio then gets you a maximum tow rating of 8,440 pounds. Go with the 3.92 gearing and the tow rating jumps up to 11,540 pounds — a massive 3,100-pound difference.

Does VIN number tell gear ratio?

You don’t. That information is not contained in the VIN, UNLESS a specific model only gets one rear end ratio. VIN tells country of manufacture, vehicle make, class, engine type, size, date of manufacture, plant and serial number.

How to find axle ratio Dodge Ram 1500?

You can always look at the tag on the differential. It has the ratio printed on it. You can also get your build sheet which is specific to your truck and lists all components used to build your truck. Simply plug your Vin number into that link.

What is the differential ratio on a Dodge Ram 1500?

This rear diff is configured with a 3.55, 3.92, or 4.10 gear ratios, and a limited slip differential, depending on the stock configuration of your Dodge Ram.

What is the gear ratio of the rear differential on a Dodge Ram 1500?

This rear diff is configured with a 3.55, 3.92, or 4.10 gear ratios, and an open differential, depending on the stock configuration of your Dodge Ram.

What is the gear ratio for a 2013 Ram 1500?

Gear Ratios 1st 4.71 2nd 3.14 3rd 2.10 4th 1.67 5th 1.29 6th 1.00 7th 0.84 8th 0.67 Reverse 3.30 Final Drive and Overall Top Gear Ratios 2.15 with 3.21 axle; 2.38 with 3.55 axle Max Torque 332 lb.

Where is the gear ratio on a Dodge Ram 1500?

you should be able to find this via the build sheet, VIN search, or by reading the tag on the rear differential. If it is a 4 wheel drive, the front and rear ratios will be the same, in the event that your tag has rotted away, your front will be more likely still in tact.

What size is the rear diff on a 2013 Dodge Ram 1500?

9.25-Inch
Dodge Ram 1500 Truck Rear Differential 9.25-Inch with Limited Slip 2013-2018.