What is the Ford Focus Block Mod?

The Ford Focus Block Mod is a modification aimed at strengthening the block of the Ford Focus ST225 engine to prevent cracked liners, which is a known weak spot of the engine . The block mod involves shimming between the liners with specially cut shims to reduce heat swelling on the block liners. This modification is considered essential for both standard and modified cars. The Dreamscience block mod, for example, is specifically designed as a preventative measure to protect the block against cracked liners. It strengthens the areas prone to cracking and is recommended for those who have spent thousands modifying their cars. The block mod is typically performed at a workshop and involves the installation of various parts, including a genuine Ford cambelt kit, head gasket, inlet and exhaust gaskets, and shim kit. The cost of the block mod can range from 500 to 700 quid.

How to add 400 hp to a car?

How to Increase Your Car’s Horsepower

1. Swap in a Performance Air Filter. Performance air filters are designed to increases air flow through your engine.
2. Install a Performance Exhaust System.
3. Install Performance Throttle Bod(ies)
4. Implement Forced Induction.
5. Remap your Car’s ECU.
6. Use High Octane Fuel.

How much power can a Focus ST block handle?

For the record, 400whp is our comfortable limit on a stock engine. Anything more and we recommend reinforcing your engine with better internals. But here’s what you need to know. There are many stock engine ST’s running around with 400whp for many thousands of miles.

What mods should I do to my Focus ST?

14 Easy, Cheap, and Effective Focus ST Mods

1. Rear Motor Mount.
2. Hood Struts.
3. LED Lighting.
4. Spark Plugs.
5. Blowoff Valve.
6. Shift Knob.
7. Rear Sway Bar.
8. Short Shift Adapter.

Can you put a V8 in a focus?

You can swap your engine for the 2.0 Ecoboost or the 2.3 Ecoboost in the Focus ST or the Focus RS without major problems. Swapping in a V6 or a V8 will be a lot more work.

How much HP can a Focus ST make?

473 to 507 whp. I think the car comes with more then enough power as is but I still have a theory that there is no such thing as to big of a number horse power and torque figures.

How do you tell if block mod has been done?

The only way you’d be able to tell would be to get the head off and have a look, you’ll see shims in the block. Likely done along with belts.

What is the block mod on a Ford Focus?

Block Mod consists of shimming between the liners with precision cut shims to reduce heat swelling on the block liners. Our Cylinder Heads undergo a thorough wash to remove all if not most of the carbon build up and oil residue!

How does the mod block work?

The mod block does a modulo mathematical operation, which is the remainder part of division. For example, 7 / 3 = 2 remainder 1, so 7 mod 3 = 1 (the remainder part). We’ll use mod to calculate which costume number to display.

Is Focus ST or RS faster?

The Focus RS and Focus ST are both high-performance hatchbacks, with the former being the faster and more powerful. But the ST would be more than enough for most people – plus you can have it as an estate. You can find plenty of used Ford models for a great price, for either the RS, ST or other variations.

What does a block mod do?

The Block Mod kit uses shims to block and strengthen the very small water ways in between the cylinder liners which are prone to overheating and cracking. This is a perfect piece of mind option especially for those who have spent thousands modifying their cars.