AHG Auto Service » Make » Dodge » What is the Dodge Magnum engine?

What is the Dodge Magnum engine?

The Dodge Magnum engine refers to the engines used in various Dodge Magnum vehicles. The Magnum engines were produced in displacements of 5.2 and 5.9 liters, which equate to 318 and 360 cubic inches respectively. These engines were primarily found in trucks, vans, and SUVs, rather than passenger cars. The Magnum series engines were a significant revision of the earlier LA series engines, with the major change being an additional set of mounting bosses on each side of the block to work with the truck motor mounts. The Dodge Magnum also offered other engine options, including a 2.7-liter V6 and a high-end 6.1-liter Hemi V8.

Did Dodge make a 5.7 Magnum?

Dodge Magnum 2nd Generation 5.7 V8 HEMI 345ps, (2005 – 2008)

Is a Dodge Magnum V6 or V8?

The Magnum had four engine options; the SE features the 190 hp 2.72 L LH V6, the SXT had the 250 hp (190 kW) 3.5 L V6, and the RT had the new 340 hp 5.7 L Hemi V8.

Are Magnum engines good?

We find these truck engines tend to survive very well, often with minimal bore wear owing to the factory 1/16-inch moly compression rings, tall overdrive gears, and the port fuel injection system.

What is the difference between a V8 and a V8 Magnum?

The Magnum series represented a substantial evolution of V8 engines for the industry, with numerous design changes aimed at enhancing performance, fuel efficiency and emissions control, setting them apart from their non-Magnum predecessors.

Why did the Dodge Magnum fail?

Dodge discontinued the Magnum in 1979, only two years after its debut. It initially sold well, with 47,827 units reaching customers in 1978, but only 25,367 left the factory during its final model year, no thanks to rising fuel prices starting with the 1970s oil crisis.

Is a Magnum engine a Hemi?

Is a Magnum engine a Hemi? – Quora. No. The “Magnum” series of engines were redesigned LA-series engines in 318 and 360 cubic inch sizes. They were a substantial improvement over the previous Chrysler small-block V8, but share almost no parts with the earlier engines.

What makes an engine a Magnum?

Magnums utilize 1.6:1-ratio pedestal rockers in place of the earlier LA-series engine’s shaft-mount 1.5:1 arrangement. The LA engine provides oil to the rocker shafts via an oil passage in the block and heads. This was deleted in later Magnum engines, which rely on pushrod oiling via the lifters.

Is a 5.9 Magnum a V8?

The 5.2L was the first of the Magnum upgraded engines, followed in 1993 by the 5.9L V8 and the 3.9L V6.

How much HP does a 5.9 Magnum have?

Magnum 5.9L V8
The standard 5.9L produced 230 hp (172 kW) at 4,000 rpm and 325 lb⋅ft (441 N⋅m) at 3,200 rpm; torque was increased to 330 lb⋅ft (447 N⋅m) at 2,800 rpm in the heavy-duty version. It was upgraded in 1998 to 245 hp (183 kW) at 4,000 rpm and 335 lb⋅ft (454 N⋅m) at 3,250 rpm.

What motor is a 5.7 Magnum?

The Mopar 5.7L HEMI Magnum V-8 Engine.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment