AHG Auto Service » Make » Ford » What is the diameter of the Ford 9 31 spline shaft?

What is the diameter of the Ford 9 31 spline shaft?

The diameter of the Ford 9 31 spline shaft is not explicitly mentioned in the search results. However, it is mentioned that the Ford 9-inch axle comes with 28 and 31 spline axles [[4]]. The search results do not provide specific information about the diameter of the 31 spline shaft. It is worth noting that as the number of splines increases, the diameter of the axle also increases.

What is the difference between a Ford 8.8 and 9 inch rear end?

The Ford 8.8 Rear Axle Is Cheaper Than a 9-Inch
11) The 8.8 is cheaper than a 9-inch, and if you add 31-spline axles, it can be as strong as a GM 12-bolt. The pinion-gear shaft diameter is larger than on a 9-inch and the same size as on a Chevy 12-bolt. 12) Ranger and Explorer axles have a 5-on-412-inch bolt pattern.

How can you tell the difference between a 28 spline and a 31 spline?

The obvious differences in 28 and 31 spline axles will be the number of splines! When you count the number of teeth (splines) on each axle, you can find out which option you have. 31 Spline Axles also tend to be larger in diameter to accommodate the increased amount of splines.

How much horsepower can 31 spline axles handle?

S/S 28- & 31-Spline Axles (28-spline up to 400 hp1, 31-spline up to 500 hp1) For street and handling performance applications, 31-spline S/S axles are recommended.

What are the dimensions of a Ford 9 pinion?

Pinion Shaft Diameter 1.312″ Spline 28. Ratio 4.00. Tooth Count 9-36.

What is the diameter of a 31 spline axle?

1.3333Axles Schmaxles

STRENGTH COMPARISON OF COMMON O.E. AUTOMOTIVE & RACING SPLINES
# Teeth Pressure Angle Major Diameter
28 45 deg 1.2083
31 45 deg 1.3333
33 45 deg 1.4167

How thick is a Ford 9-inch axle tube?

0.188″
Universal Axle Tubes
These Aeroflow Ford 9″ axle tubes are 76mm (3″) in diameter with a thick 0.188″ wall. They have a total length of 53.5cm (21″).

How do you measure a Ford 9-inch axle shaft?

So with your caliper zeroed. Out we’re gonna pull from the straight edge out to the face. And you’re gonna get 2.5. That’s the most important measurement there so we’re at 2.50. Two and a half inches.

What is the diameter of the Ford 9-inch rear end?

Types Of 9″ Ford Axle Housings
69-77 Ford Galaxies (coil spring), Lincoln cars (coil spring), and late pickups (leaf spring)- 3.25 inch diameter all the way to the backing plate, coil housings have upper control arm mount.

What is the best way to check the size of a shaft?

This is a 5 8. So it’s going to be around 0.625. You can also use a tape measure. Just size it up there you can see pretty easily that is half inch. And then on this machine.

How do you measure the diameter of an axle shaft?

If you don’t want to remove your wheels from your axle. Measuring. The brake flange outside to outside is going to be an easier measurement for. You. Our measurement is 82 and 5 8.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment