AHG Auto Service » Make » Ford » What is the code P0113 on a Ford Transit Custom?

What is the code P0113 on a Ford Transit Custom?

Understanding the P0113 Code on a Ford Transit Custom
The P0113 code on a Ford Transit Custom indicates an issue with the Intake Air Temperature (IAT) Sensor 1 Circuit High Input. The IAT sensor is built into the Mass Air Flow (MAF) sensor and is responsible for detecting intake air temperature and transmitting a signal to the Powertrain Control Module (PCM). The PCM uses this signal for various functions such as calculating idle speed, fuel mixture, and spark advance. The code is triggered when the PCM detects an excessively high voltage from the sensor, indicating a problem with the IAT sensor or its circuit.
Symptoms and Causes
– Symptoms: When the P0113 code is set, the engine may display symptoms such as difficulties in cold starts, misfires, and the illumination of the check engine light. The specific symptoms can vary depending on the vehicle manufacturer.
– Causes: The triggering of the P0113 code can be caused by a faulty IAT or MAF sensor, a dirty air filter, or complications with damaged or corroded wiring. It’s also important to visually examine the corresponding wiring harness and connectors for any signs of damage or corrosion.
Diagnosis and Repair
To diagnose the P0113 code, it typically requires 1.0 hour of labor. It is advisable to use a code reader to plug into the vehicle and find out what error is causing the issue. If the P0113 code appears, it means there’s an issue with the intake air temperature sensor. It is okay to drive a vehicle with P0113 for a short period of time, but driving with this code for an extended period can cause internal engine damage due to the engine running so lean. Therefore, it is recommended to get this code fixed as soon as possible to avoid emission system and catalytic converter damage .
Prevention and Professional Help
To prevent future occurrences of the P0113 code, it is important to ensure all wiring connections are secure and in good condition, replace clogged filters, inspect for vacuum leaks, and replace faulty sensors with OEM-quality parts. Regular servicing of the vehicle is also essential to ensure that all components are functioning correctly. Getting professional help for your Ford can save you time and money in the long run, so it’s advisable not to wait if any issues are experienced.
In summary, the P0113 code on a Ford Transit Custom indicates a high input problem with the Intake Air Temperature (IAT) Sensor, and it is important to address this issue promptly to avoid potential internal engine damage.
If you need more information on how to fix the P0113 Ford code, it is recommended to consult a professional or find a repair shop in your area for assistance.

Can a dirty air filter cause a P0113 code?

Common Causes of the P0113 Code
– Dirty air filter. This will cause your intake to overheat but is relatively easy to fix. – A faulty or damaged IAT sensor. This is a very common cause.

How do I fix error code P0113?

Circuit. Here are two simple diy methods you can try to solve this problem method a the iad sensor. The iad sensor could be on the throttle body attached right to the intake. Manifold.

Is code P0113 serious?

How Serious Is the P0113 Code? Error code P0113 is recognized as a minor issue. The causes that trigger this code may not result in immediate danger to your vehicle, but if the problem is not addressed within a reasonable time, the issue can become more serious and result in misfires.

Where is the intake air temperature sensor on a transit?

Re: Intake air temperature sensor
It’s located under the van at the very front on the intercooler radiator.

Can you drive with a P0113 code?

The causes that trigger this code may not result in immediate danger to your vehicle, but if the problem is not addressed within a reasonable time, the issue can become more serious and result in misfires. If your vehicle is misfiring, it should not be driven under any circumstances.

What causes a bad intake air temperature sensor?

CAUSES OF A FAULTY IAT SENSOR: CAUSE OF FAILURE
Internal short circuits. Breaks in wiring. Wiring short circuit. Mechanical damage.

What is the code P0113 on a Ford Transit?

P0113 is a powertrain DTC which indicates that the voltage signal from the intake air temperature (IAT) sensor is too high. The IAT’s resistance fluctuates based on the temperature. For most IAT sensors, the resistance increases at lower temperatures and decreases as the temperature increases.

Can I drive with P0113?

The P0113 code can damage your vehicle if you continue to drive with this code. It’s serious because it can mess with your vehicle’s running temperature, air-to-fuel ratio, and ignition system. Failing to address the code will result in misfires, trouble starting the engine, and several other severe problems.

Where is intake air temperature sensor located?

The intake air temperature sensor that’s located right here on the inlet to the air filter housing very simple straightforward to get it.

What happens when intake air temperature sensor goes bad?

This can result in poor engine performance such as rough idle, hesitation, reduced power, or sluggish acceleration. If the IAT sensor provides inaccurate readings, the engine may have difficulty starting, especially in cold weather. It may also cause the engine to stall or die shortly after starting.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment