The BSM light on your Toyota Highlander stands for Blind Spot Monitor. The Blind Spot Monitor is a system that uses rear side radar sensors installed on the inner side of the rear bumper on the left and right side to assist the driver in confirming safety when changing lanes. When the BSM system is turned on, the available BSM switch illuminates. If a vehicle is detected in a blind spot, the outside rear view mirror on that side of the vehicle illuminates, and if the turn signal lever is activated when a vehicle is in a blind spot, the outside rear view mirror indicator flashes.
If you are experiencing a BSM malfunction, such as the BSM light staying on permanently or the system not functioning properly, there could be various reasons for it. One user reported that the BSM sonar located behind the rear left-hand bumper cover malfunctioned due to the thickness of the paint on the bumper bar. In another case, a user mentioned that the BSM signal was on the dash and the vehicle wouldn’t start. It is unclear if the BSM light being on is directly related to the starting issue, so it would be best to have the vehicle inspected by a Toyota dealer to diagnose and resolve the problem.
If you have a 2013 Toyota Avalon and the BSM system has come on, you may consider contacting Toyota for assistance. They may charge a fee for diagnosing the problem, but it’s always a good idea to consult with a professional if you are unsure about resolving the issue yourself.
Remember, the Blind Spot Monitor is a helpful driver-assist feature, but it is important to always physically check your blind spot and use your turn signals when changing lanes, as the BSM system has its limitations.
I hope this information helps! Let me know if you have any other questions.
Contents
- What does the BSM button look like?
- How do you turn off the BSM light on a Toyota?
- How do I turn my BSM back on?
- What does it mean when BSM light comes on?
- How do you clean a blind spot sensor?
- Why is BSM off?
- Why is my BSM light on Toyota?
- Why is my BSM not working?
- How do you turn on the BSM on a Toyota Highlander?
- Where is the BSM sensor located?
It has a BSM button on the dashboard. Usually to the left of the steering. Wheel. Press the button to turn the blind spot monitor. On it will illuminate a chime will sound.
How do you turn off the BSM light on a Toyota?
And if you press enter. Okay so that’s going to switch it off okay. But if you press enter again it’s gonna turn it on and you’re going to have the glowing.
How do I turn my BSM back on?
Instead. If you look to the left you will see a button indicating BSM. If you push it and the green light is on it is now active. And once you push it. Again. It’s off.
What does it mean when BSM light comes on?
The BSM warning indicator lights are equipped on the left and right door mirrors. The warning indicator lights turn on when a vehicle approaching from the rear in an adjacent lane is detected.
How do you clean a blind spot sensor?
Road to clean your vehicle sensors simply wipe them with a microfiber cloth. If you would like to know more tips like the ones shared in this.
Why is BSM off?
If the BSM OFF indicator light remains illuminated, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible. Some problem with the system including the BSM warning indicator lights is detected. A large deviation in the installation position of a radar sensor (rear) on the vehicle has occurred.
Why is my BSM light on Toyota?
Blind Spot Monitor Warning
If you see BSM on your dashboard, you’ll want to have a certified Toyota technician inspect the Blind Spot Monitor System in your RAV4. This light indicates a malfunction with the driver-assist feature and will need to be repaired to ensure proper operation.
Why is my BSM not working?
You should look for any signs of damage, dirt, or obstruction that may interfere with the sensor performance. You should also check the wiring and connectors for any loose or corroded contacts. If you find any problems with the sensors, you should clean them, repair them, or replace them as needed.
How do you turn on the BSM on a Toyota Highlander?
For what you’re doing. So I’m gonna scroll down here down to the gear. Once you get down to the gear here. You’re gonna be able to see you have a lot of options. So.
Where is the BSM sensor located?
rear bumper
The radar sensors are typically located in the rear bumper of the vehicle, and they emit radar waves that are reflected off of other vehicles. The radar sensors can then detect the presence of a vehicle in the blind spot and alert the driver with a visual or audible warning.
