The bore and stroke of a 4.6 Ford engine are as follows:
– Bore: 3.552 inches
– Stroke: 3.543 inches
These measurements result in a nearly square bore and stroke ratio for the 4.6 Ford engine.
Please note that the 4.6 Ford engine is part of the Ford Modular V8 engine family, which has undergone various changes and improvements over the years.
Contents
- How much HP can a Ford 4.6 make?
- Is the Ford 4.6 4v a good engine?
- What is the specs of the 4.6 Mustang?
- Which is better 5.0 or 4.6 Mustang?
- What was the failure of the Ford 4.6 engine?
- Is the Ford 4.6 L V8 a good engine?
- What are the most common problems in a 4.6 Ford engine?
- What is the stroke of a 4.6 L 4V?
- How much power can you get out of a 4.6 4v?
- How much horsepower does a 2 valve 4.6 have?
How much HP can a Ford 4.6 make?
How Much Horsepower Does a 4.6 V8 Have? The 4.6 Ford engine can have anywhere between 215 HP to 390 HP from the factory, depending on the version. The Modular 4.6 Ford engine was available in two, three, and four-valve configurations.
Is the Ford 4.6 4v a good engine?
The 4.6L engine has a good reputation for reliability, but like any engine it has had a few problems. The relatively long timing chain that drives the overhead cams is tensioned by plastic guides on many of these engines.
What is the specs of the 4.6 Mustang?
The GT model continued to use the 4.6 L V8 as before, but now power output was rated at 260 hp (194 kW; 264 PS) at 5,250 rpm and 302 lb⋅ft (409 N⋅m) of torque at 4,000 rpm.
Which is better 5.0 or 4.6 Mustang?
4.6 is much smoother running of an engine. Very refined. The 5.0 is a little rough around the edges but nothing bad. Stock for stock, the best 5.0 put into a Mustang (say a 5.0 Cobra) will fall off in power before a PI 4.6 (99-04 GT).
What was the failure of the Ford 4.6 engine?
The ford 4.6 l v8 came with a plastic intake manifold from 1996 to 2001. However, it had one major flaw due to which it was more prone to failure. The plastic subject to varying heat and cooling cycles lead to its constant expansion and contraction.
Is the Ford 4.6 L V8 a good engine?
The 4.6 lt Ford engine with the 2 or 3 valve OHC ( single overhead cam ) is extremely reliable and durable. On trucks there were issues with exhaust manifold studs breaking . also the three valve engines had spark plugs that could be very difficult to remove, but a special tool made for that purpose works really well.
What are the most common problems in a 4.6 Ford engine?
We’ll also cover how to avoid the issues and what to look for when shopping for a vehicle with this engine.
- The Most Common Problems With Ford 4.6L Engines:
- Intake Manifold Failure.
- Timing Chain Guide Failure.
- Spark Plug Failure.
- Oil Pressure Drop.
- Product Speedbumps.
- Avoiding 4.6 Engine Problems.
What is the stroke of a 4.6 L 4V?
The 4.6 L’s bore and stroke are nearly square at 3.552 in × 3.543 in (90.2 mm × 90.0 mm), respectively. Deck height for the 4.6 block is 8.937 in (227.0 mm) and connecting rod length is 5.933 in (150.7 mm) center to center, giving the 4.6 L a 1.67:1 rod to stroke ratio.
How much power can you get out of a 4.6 4v?
Adding the ported heads, intake, and Comp cams to the 4.6L, Four-Valve motor offered dramatic power gains. The peak power outputs jumped from 336 hp and 332 lb-ft of torque to 435 hp and 409 lb-ft.
How much horsepower does a 2 valve 4.6 have?
190 hp – 260 hp
1991 to 2012 4.6L Ford 2-Valve Modular Motor Technical Specifications
| Performance Specifications | |
|---|---|
| Compression Ratio | 9.0:1 |
| Horsepower Rating | 190 hp – 260 hp |
| Torque Rating | 260 ft./lbs. – 305 ft./lbs. |
