The bolt size of a Toyota Highlander depends on the specific generation and model year. However, based on the search results, here is the information I found:
– Toyota Highlander IV (XU70) [2020-2024] has a bolt pattern of 5×114.3, a center bore of 60.1 mm, and a thread size of M12 x 1.5 [[5]].
– Generations of the Toyota Highlander made from 2004 onwards have a bolt pattern of 5×114.3 mm, a center bore of 60.1 mm, and five lug nuts with a thread size of M12 x 1.5.
– The bolt pattern for the Toyota Highlander has been 5×114.3 since 2001, although there may be variations within the same generation or year due to trim level specifications.
Please note that it is always recommended to consult the owner’s manual or contact a Toyota dealership for the most accurate and up-to-date information regarding the bolt size of a specific Toyota Highlander model.
I hope this information helps! Let me know if you have any other questions.
Contents
- What size are Toyota bolts?
- What size is a plug socket?
- Does Toyota use standard or metric?
- What type of bolts does Toyota use?
- What size are Toyota brake bolts?
- What size sockets does Toyota use?
- How do I know if my bolt is M8 or M10?
- How do I measure what size bolt I need?
- What is the right bolt size?
- Does Toyota use metric bolts?
What size are Toyota bolts?
10, 12, 14, and 17 mm are the most common sizes. Add in 19 and 21 mm and maybe 8mm and you should be able to undo any bolt or nut.
What size is a plug socket?
Use the following table to match plugs and sockets accordingly.
| 3 Pin | Plug | Socket |
|---|---|---|
| 16A | 43mm | 35mm |
| 32A | 57mm | 46mm |
| 63A | 69mm | 59mm |
| 125A | 80mm | 70mm |
Does Toyota use standard or metric?
Toyota trucks use metric sizes, not standard, so you don’t have to double up with a standard set as well if you want to keep it light. I also keep an extra spark plug socket just in case. Not common, but if you ever get a bit too zesty and hydrolock your truck, a sparkplug socket might come in handy.
What type of bolts does Toyota use?
Toyota uses JIS fasteners. They usually have a small head in comparison to thread diameter. There’s also a handful of fasteners that will use a fine pitch thread.
What size are Toyota brake bolts?
Toyota uses JIS bolts. Which puts that bolt at about a 7T.
What size sockets does Toyota use?
Metric Wrenches
I like to carry a variety of sizes with me just in case, but the majority of bolts on a Toyota will be 10,12,14,17,19,21mm. One of the most important wrenches to keep with you is a 10mm flare nut wrench.
How do I know if my bolt is M8 or M10?
Thread Diameter: M8: The “M” stands for metric, and “8” refers to the nominal diameter of the bolt’s thread in millimeters. So, an M8 bolt has a thread diameter of 8mm. M10: Similarly, an M10 bolt has a thread diameter of 10mm. M12: An M12 bolt has a thread diameter of 12mm.
How do I measure what size bolt I need?
And I’m at right at a half inch. So this is a half inch diameter Bolt. We’re going to measure length. And it looks like this is a 1.5 inch long bolt. And then we’re going to measure thread pitch.
What is the right bolt size?
A typical rule of thumb . . . Use a bolt diameter that is 1.5 – 2.5 times (up to three times) the thickness of the thinner material you are bolting together. So, for 1/8″ material, a 1/4″ diameter is often a good bolt choice. For 1/4″ thick material, perhaps a 3/8″ or 1/2″ bolt.
Does Toyota use metric bolts?
Japanese cars, including those from Toyota, typically use metric measurements.
