What is the bolt pattern on a Dodge Nitro?

Bolt pattern of the Dodge Nitro
The bolt pattern on a Dodge Nitro is 5×114.3mm. This refers to a 5-bolt pattern arranged in a circle with a diameter of 114.3mm.
The Nitro uses standard lug nuts with a thread size of 1/2 inch – 20 UNF. The center bore diameter is 71.6mm.
The 5×114.3mm bolt pattern has been consistent on the Dodge Nitro from 2007 to 2012. Sometimes the bolt pattern can vary slightly between 2-wheel drive and 4-wheel drive models of the same year.
Wheel and tire specifications
The Nitro comes equipped with a wide range of wheel and tire sizes from the factory, ranging from 16 inches to 20 inches.
Tire pressures vary depending on wheel size – 16, 17 and 18 inch wheels require 32 PSI while 19 and 20 inch wheels require 35 PSI. Some common original equipment tire sizes included 255/75R16 and 235/65R17.
Wider aftermarket wheels from 18 to 20 inches can also be fitted as long as they match the 5×114.3mm bolt pattern. Wheel adapters may be required in some cases of a mismatch.
Torque specifications
It’s important to apply the correct torque, typically between 80-100 Nm or 60-75 ft-lbs, when tightening lug nuts on the Nitro. This ensures the wheels are securely fastened. Refer to the owner’s manual for exact specifications.

What bolt pattern does Dodge use?

As time marched on, American automakers began adopting the metric system for their vehicle fasteners. All Dodge Challengers manufactured from 2008 onwards have a bolt pattern of 5×115 mm (5 x 4.53 inches).

What size rims are on 2008 Dodge Nitro?

16-17″ diameter, 7″ width2008 Dodge Nitro / Wheel size

Can you put 5×114 rims on a 5×114 3 lug pattern?

Yes they will fit fine.

Are 5×114 3 and 5×4 5 the same?

While the numbers are different, the wheels themselves feature the same exact bolt pattern. So if you’re on the hunt for 5×4. 5 wheels and someone says you really need a 5×114. 3, you’ll know that you’re both talking about the same thing.

Is 8×165 1 the same as 8×6 5?

5 (8×165. 1) Bolt Pattern Wheels. This bolt pattern is known by two different numbers, but there is no real difference between the fitments except that one is written in inches and the other in millimeters.

Will a 5×114 3 rim fit a 5×115?

And the hubs bolts or lugs. This will affect your stability traction. And overall control of the vehicle. Another safety concern is the stress you’re putting on the bolts.

Are Dodge and Chevy bolt patterns the same?

If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs. In fact I think that’s what you’ll run into going from Chevy to dodge.

What is a 5×114 3 bolt pattern?

A bolt circle of 5×114. 3 mm would indicate a 5 lug pattern on a circle with a diameter of 114.3mm (or 4.5″).

Is 5×114 3 the same as 5×115 bolt pattern?

no they are not the same. 5×114. 3mm (5×4. 5″) will not fit properly on a 5×115 bolt pattern.

What fits a 5×115 bolt pattern?

Wheels with a 5×115 bolt pattern can be found on a ton of great vehicles, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs and more. Whether you’re rocking that classic American muscle or a refined vehicle that boasts high-end luxury, you can amp up your ride’s looks with 5×115 wheels.