The 2024 Dodge Hornet’s bolt pattern is 5×110 mm (5-lug pattern). This means the vehicle has 5 lug nuts arranged in a circle with a diameter of 110 millimeters.
Contents
Detailed Breakdown:
- Bolt Pattern: 5×110 mm
- Lug Count: 5 lugs
- Center Bore: 65.1 mm (the size of the hole in the center of the wheel that fits over the hub)
- Thread Size: M12x1.5 (metric size of the lug nuts)
- Torque Specification: Typically between 90-100 lb-ft, but it’s recommended to check the owner’s manual for precise torque values.
Compatibility:
The 5×110 mm bolt pattern is also common in some other vehicles, including certain models of the Jeep Compass, Chevrolet Equinox, and Buick Encore GX. However, always verify compatibility with the specific wheel specifications.
Additional Notes:
- Offset: The Dodge Hornet usually comes with a positive offset, meaning the mounting surface is closer to the outer edge of the wheel. This is typical for modern SUVs.
- Aftermarket Wheels: If you’re considering aftermarket wheels, make sure they match not only the bolt pattern but also the center bore and offset to avoid fitment issues.
What is 4×156 lug pattern?
On odd numbered bolt patterns (5-lug), measure from the very top of one bolt hole to the center of the bolt hole directly across from it. A couple of the most common bolt patterns are 4×156 (which means four lugs and a distance of 156mm between each) and 4×137 (four lugs and 137mm between lug holes).
What is Dodge 5 lug pattern?
2008 – Present Dodge Challenger Lug Pattern
All Dodge Challengers manufactured from 2008 onwards have a bolt pattern of 5×115 mm (5 x 4.53 inches). Although all modern Dodge Challenger bolt patterns are the same, wheel diameter and width and other specs vary by trim level and year.
Is 8×165 1 same as 8×6 5?
This bolt pattern is known by two different numbers, but there is no real difference between the fitments except that one is written in inches and the other in millimeters.
Will 8×6 5 fit Ram 2500?
The 8×6. 5″ bolt pattern has been used on the Dodge Ram 2500 & 3500 dating back to 1946, Ford F250 & F350 trucks from 1955 to 1998, and also the Chevy & GMC 2500 & 3500 trucks from 1967 to 2011. The Hummer H2 has also shared the 8×6. 5″ wheel bolt pattern.
Will a Dodge 8×6 5 fit a Ford 8×6 5?
Wheels should have 8-by-6.5-inch lug patterns. However, the center bore of the wheel might make it impossible to bolt it to the truck. No, the Dodge is a 8x165mm bolt pattern and the Ford is 8x170mm. Sell the wheels and buy what you want for your new truck.
Is 8×165 the same as 8×6 5?
5 (8×165. 1) Bolt Pattern Wheels. This bolt pattern is known by two different numbers, but there is no real difference between the fitments except that one is written in inches and the other in millimeters.
What is Dodge bolt pattern?
Bolt Pattern For A Dodge Charger
The Dodge Charger bolt pattern for the years 1966-1978 is 5×4.5″ (5×114.3mm). Model years 1982-1987 have a Dodge Charger lug pattern of 4×3.94″ (4x100mm). Lastly, the Dodge Charger bolt pattern for the model years 2005 to present are 5×4.53″ (5x115mm).
Is the bolt pattern on a Polaris RZR?
Polaris: All Modern full sized ATV & SxS’s are 4/156 bolt pattern.
Are Dodge and Chevy 8 lug the same?
If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs. In fact I think that’s what you’ll run into going from Chevy to dodge.
What does 8×6 5 bolt pattern mean?
The 8×6. 5 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (8) and the bolt circle measurement (6.5), the notional circle determined by the center position of the studs. The 8×6.5 bolt pattern is common to Chevrolet, Dodge, Dongfeng, Ford, GMC, Holden and Hummer vehicles.
