The bolt pattern on a 2008 Dodge Magnum is 5×115 [[10]]. This means that the vehicle has 5 bolt holes and the diameter of a circle through those holes is 115mm. The bolt pattern has remained the same for different years of production and has not changed since the model came off the production line.
Contents
- What is Dodge bolt pattern?
- What vehicles use 5×115 bolt pattern?
- Are 5×114 3 wheels the same as 5×4 5?
- Is 8×165 the same as 8×6 5?
- What bolt pattern is 5×115?
- Will a 5×114 3 fit a 5×115?
- How can you tell the difference between 114.3 and 115?
- Is Dodge bolt pattern the same as Chevy?
- What has 8×170 lug pattern?
- What is a Dodge Magnum bolt pattern?
What is Dodge bolt pattern?
Bolt Pattern For A Dodge Charger
The Dodge Charger bolt pattern for the years 1966-1978 is 5×4.5″ (5×114.3mm). Model years 1982-1987 have a Dodge Charger lug pattern of 4×3.94″ (4x100mm). Lastly, the Dodge Charger bolt pattern for the model years 2005 to present are 5×4.53″ (5x115mm).
What vehicles use 5×115 bolt pattern?
Wheels with a 5×115 bolt pattern can be found on a ton of great vehicles, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs and more.
Are 5×114 3 wheels the same as 5×4 5?
While the numbers are different, the wheels themselves feature the same exact bolt pattern. So if you’re on the hunt for 5×4. 5 wheels and someone says you really need a 5×114. 3, you’ll know that you’re both talking about the same thing.
Is 8×165 the same as 8×6 5?
5 (8×165. 1) Bolt Pattern Wheels. This bolt pattern is known by two different numbers, but there is no real difference between the fitments except that one is written in inches and the other in millimeters.
What bolt pattern is 5×115?
The 5×115 bolt pattern is used by several car manufacturers such as Buick, Cadillac, Chevrolet, Chrysler, Dodge, and Pontiac. Aside from huge selection, when you order from us you also get fast and free shipping, and financing options, if needed.
Will a 5×114 3 fit a 5×115?
So let’s answer the question of F5. By 114.3 Wheels can fit on a five by 115 volt pattern the simple answer is yes. It’s possible to fit those wheels on that bolt pattern.
How can you tell the difference between 114.3 and 115?
4.5 inches is 114.3 millimeters. 115mm is . 7mm or . 028 inches different, which is negligible, it’s the thickness of 7 sheets of paper.
Is Dodge bolt pattern the same as Chevy?
If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs. In fact I think that’s what you’ll run into going from Chevy to dodge.
What has 8×170 lug pattern?
If you have a Ford F250 or F350 from 1999 onward, your wheels will most likely be drilled in the 8×170 bolt pattern. Wheel sizes for these trucks come in a wide range, with 16” to 24” sizes being the most common.
What is a Dodge Magnum bolt pattern?
Dodge Magnum has the following bolt patterns: 5×115. The table below shows how the bolt pattern (PCD) of the Dodge Magnum has changed over the life cycle, depending on the vehicle generation: Generation. Production Years.
