AHG Auto Service » Make » Ford » What is the axle width of a 1965 Ford Falcon?

What is the axle width of a 1965 Ford Falcon?

The axle width of a 1965 Ford Falcon can vary depending on the specific model and configuration. However, based on the available information, it appears that the rear axle width for a 1965 Ford Falcon is approximately 58 inches . It’s worth noting that there may be some variations in axle width depending on the specific trim level or optional features of the vehicle.
Please keep in mind that this information is based on the available search results, and there may be additional factors or variations that could affect the axle width of a 1965 Ford Falcon.

How wide is the rear axle on a 1960 Ford Falcon?

The 1963 Falcon and Comets Rear Axles as well as the 1960, 1961, 1962 7 1/4 Axels are suppose to be 55.8 Inch Wide.

How wide is a 1964 Falcon rear end?

Re: 64 rear end width
Here it is again,64/65 Comet/Falcon 8″ rearend is 58 inches wide! You will need to narrow an 8.8 to fit,most people remove the long axle tube and axle and replace it with a second narrow side tube and axle!

How wide is a EF Falcon?

Ford Falcon (EF)
Wheelbase 2,791 mm (109.9 in)
Length 4,906 mm (193.1 in)
Width 1,861 mm (73.3 in)
Height 1,453 mm (57.2 in)

How wide is a 1965 Mustang rear end?

The Ford 8.8 Mustang Rear End

Vehicle Application Axle Width (inches)
FORD
’65-’66 Mustang 57 11/44
’67-’70 Mustang 8.0 59 51/48
’71-’73 Mustang 61 11/44

How do you measure rear axle width?

Place. All right so we’re going to do that on both sides. And then the whole goal is now that we can measure from one side to the other we’re going to use a tape measure.

What is the width of the rear end of a 63 Ford Falcon?

This might be of some help. A stock 63 falcon V8 is 56 inches, the narrowest 8″ ford made.

What is the width of the axles on a Ford Falcon?

56.5″
The standard width is 56.5″ Axle Flange to Axle Flange but custom widths are available for mini-tubbed cars.

What are the dimensions of the Ford Falcon?

Ford Falcon (BA)
Wheelbase 2,829 mm (111.4 in)
Length 4,916 mm (193.5 in)–5,053 mm (198.9 in)
Width 1,864 mm (73.4 in)
Height 1,444 mm (56.9 in)

How wide is a 1965 Ford Falcon rear end?

The 1964 & 65 Falcon and Comets V8’s had a 58 inch wide 8 inch axle. The match from that is the 1977 to 1981 Granada / Monarch had both the 8 and 9 inch axles or the Lincoln Versailles 9 inch rear end the bonus is that they also have Disk Brakes.

What is the width of the rear end of a 1964 Ford Falcon?

Here it is again,64/65 Comet/Falcon 8″ rearend is 58 inches wide! You will need to narrow an 8.8 to fit,most people remove the long axle tube and axle and replace it with a second narrow side tube and axle! Narrowist 8″ is the Maverick at 56.50 inches,this is what I used on my Wagon build!

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment