What is the axle ratio on a Dodge Charger?

The axle ratio on a Dodge Charger can vary depending on the specific model and package. Different axle ratios are available to suit different driving preferences and performance needs. The available axle ratios for the Dodge Charger include 2.65, 2.83, 3.06, 3.23, 3.55, 3.73, 3.92, and 4.10. The specific axle ratio for a particular Charger model can be determined by checking the vehicle’s specifications or consulting with a knowledgeable professional.
Please note that the information provided is based on the search results and may not cover all possible variations. It is always recommended to refer to the official Dodge website or consult with a Dodge dealer for the most accurate and up-to-date information on specific models and their axle ratios.

Is 3.42 or 3.73 better?

3.42 is usually better for economy. 4.10 is best for acceleration and towing. 3.73 is a compromise many people look for. The truck will run just fine with any of them.

What axle ratio is best for speed?

Performance: Looking again at the ratios used above, the higher 3.55 ratio indicates faster acceleration whether the truck’s empty or loaded. The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73.

Is a 3.92 rear axle ratio good?

In short, yes. Which axle ratio you go with will affect your truck’s towing capability, but fuel economy will change too. A higher axle ratio (like the 3.92 we mentioned earlier) will allow for higher towing capability, but it requires higher engine rpm for any given speed and then results in lower fuel economy.

What is the axle ratio of the Scat Pack?

3.90
R/T Scat Pack
The rear axle ratio is 3.90 with a 230MM rear axle, which is an anti-spin differential rear axle.

What is a 3.73 axle ratio good for?

A numerically higher axle ratio provides a mechanical advantage to send more of the engine’s available torque to the rear tires (and front tires, in a four-wheel drive vehicle), but you pay the price at the fuel pump. So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.

How do I find my axle ratio?

The easiest way to find an axle ratio is to check the spec sheet in your owner’s manual. It may also be listed on a sticker that you can find on the outside of your differential.

Which is better 3.21 or 3.92 axle ratio?

In very general terms, the 3.21 would be expected to yield a bit better fuel economy at a slight acceleration penalty; the 3.92 a bit better acceleration at a slight economy penalty.

What is the gear ratio of the Dodge Charger Scatpack?

So the gear ratio in a dodge scat pack is 3.09 or 3.90.

What gear ratio is Challenger?

Gear Ratios
A typical final drive ratio in a Challenger is 3.92:1.

What is a 3.42 rear axle ratio?

Axle ratios may be expressed in notation as something along the lines of “3.42:1,” or a “3.42 rear axle.” In either case, it essentially means the drive shaft and pinion need to rotate 3.42 times in order to rotate the axle shafts once.