What is the axle ratio for the Ford Ranger?

The axle ratio for the Ford Ranger can vary depending on the specific model and year. However, there are several common axle ratios that have been used in the Ford Ranger. According to the search results, some of the axle ratios that have been used in the Ford Ranger include:
– 3.08
– 3.27
– 3.45
– 3.55
– 3.73
– 4.10
Please note that these are just some examples, and there may be other axle ratios available for different models and years of the Ford Ranger. To determine the specific axle ratio for a particular Ford Ranger, it is recommended to locate the axle tag on the rear differential cover or refer to the Federal Compliance Sticker in the door jamb, which provides information about the axle code and corresponding axle ratio [[4]].

What is the best differential gear ratio?

The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy. This is a good ratio for the occasional towing or hauling individual. For a person who tows more often, and heavier loads, the 3:73 or 4:10 may be more appropriate. 2023 Ford Super Duty F-250 Tremor.

Does Ford Ranger have diff lock?

Rear electronic differential lock is available in this mode. Don’t use this mode when driving on a hard-packed surface as you could damage your vehicle’s driveline. Baja3 (Ranger Raptor Only): This mode is designed for off-road performance.

How do I find my Ford axle ratio?

To find the axle code:

1. View the Safety Compliance Certification Label on the driver’s side, front or rear door panel.
2. Find the word “AXLE” under the bar code.
3. Find the two-digit code under “AXLE.”

Should I get 3.73 or 4.10 gears?

There is only a 10% difference between 4.10 and 3.73 gears. Unless you need to tow heavy loads, I would keep the 3.73 gears. Or maybe if you are going to big, big tires. Otherwise you probably won’t notice the difference.

What is the rear diff ratio for a 2008 Ford Ranger?

Notes: Rear, Drive Axle Assembly. Gear ratio 3.73. With 7.5 Ring Gear.

Is a 3.73 axle ratio good?

The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.

Can I run 35s with 3.73 gears?

You can do it but it’s definitely not ideal. The ratios with a 5.13 first on a 3.73 rear end and 35’s (your proposed setup) is very slightly taller than what a stock 6MT Tacoma is in first gear so it’s not like you’re going to be causing massive wear getting started.

Can I find gear ratio by VIN?

You don’t. That information is not contained in the VIN, UNLESS a specific model only gets one rear end ratio. VIN tells country of manufacture, vehicle make, class, engine type, size, date of manufacture, plant and serial number. That is the ONLY information contained by the VIN.

Where do I find my axle gear ratio?

Check the Differential Cover
The axle may have a sticker, and on the differential cover, you might have a small metal tag that’s sticking out that will have the gear ratio stamped on it.

What is the front diff ratio of the Ford Ranger?

FORD RANGER DIFFERENTIAL CENTRE FRONT, 3.0, DIESEL, AUTO T/M, PJ-PK, 3.727 RATIO.