What is the alternative to Ford transfer case fluid?

Alternative to Ford Transfer Case Fluid
When it comes to finding an alternative to Ford transfer case fluid, it is important to consider the specific requirements for your vehicle’s transfer case. Different Ford models and transfer case types may have different fluid recommendations. Here are some findings from the search results:
– For Ford gear drive transfer cases from 1959-1977, some Ford shop manuals recommend using SAE 50 engine oil for temperatures above 10°F and SAE 30 engine oil for temperatures below 10°F. Alternatively, SAE 90 weight mineral oil without extreme pressure additives can be used above 10°F, and SAE 80 mineral oil without EP additives can be used below 10°F.
– The NP203 Full-Time, Chain Drive Transfer Case from 1974-1979 requires engine oil as a lubricant.
– For transfer cases where MERCON ATF was previously recommended, Motorcraft Synthetic Blend MERCON V Automatic Transmission and Power Steering Fluid is recommended by Ford Motor Company.
– Some forum posts suggest using Mercon III or an equivalent fluid for transfer cases, as Mercon V is not recommended for use in transfer cases.
It is important to note that these recommendations may vary depending on the specific model and year of your Ford vehicle. To ensure the correct fluid for your transfer case, it is recommended to consult your vehicle’s owner’s manual or contact a Ford dealership for the most accurate information.
Remember to always follow the manufacturer’s recommendations to ensure proper performance and avoid potential damage to your vehicle’s transfer case.

What fluid can I put in my transfer case?

automatic transmission fluid (ATF)
Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants. It is important to regularly inspect the transfer case for any damage, leaks, or other concerns.

What should I put in my transfer case?

Most transfer cases are filled with an automatic transmission fluid, which is usually red in colour. Others use a thicker gear oil, and some use a specialized fluid that is specifically made just for that transfer case.

What is the equivalent of Motorcraft XT 2 QDX?

Valvoline DEX/MERC (ATF) Automatic Transmission Fluid
Upload complete! A: Yes, the Valvoline DEXRON/MERCON Automatic Transmission Fluid – 1gal (773636) will be suitable for use in place of the XT-2-QDX.

What happens if I use Mercon LV instead of Mercon V?

In summary, using Mercon LV instead of Mercon V is not recommended due to their differing viscosities, chemical compositions, and intended use in specific types of transmissions. Always consult your vehicle’s owner’s manual or a professional mechanic before making a decision.

What fluid is compatible with Mercon V?

The following applications are specifically recommended: Ford Mercon V and Mercon; Dexron-II and Dexron-III; Caterpillar TO-2; Allison C-4; and some power steering fluid applications. Mercon V is also backwards compatible with Mercon and can be used in Mercon applications.

What transfer case fluid does Ford recommend?

Both Dexron II/Dexron III and Mercon fluid are listed in Ford Shop Manuals as meeting the same Ford specification XT-2-QDX.

Can you put ATF fluid in a transfer case?

You need to clean it with oil flush as well. No need to do that, just drain and refill with ATF. ATF is used with chain-driven transfer cases, gear lube is used with gear-driven transfer cases. And don’t feel rushed to do it, gear lube isn’t going to wreck your TJ’s chain driven transfer case.

Is a transfer case fluid necessary?

For example, only the front wheels will receive power if the car is set to two-wheel drive mode. Transfer cases require a lubricant to function correctly. This keeps the gears moving smoothly and prevents friction between the various moving parts. This lubricant is usually referred to as transfer case fluid.

Can Mercon V be used in transfer case?

Ford Now Says Don’t Use Mercon V in your Transfer Case: See the current back of Mercon V product: “Not for use in transfer cases.”

Is transmission and transfer case fluid the same?

Both fluids serve as cooling lubricants for their respective systems. However, the two lubricants are different. While some transfer cases use automatic transmission fluid instead of dedicated transfer case fluid, the two are generally not interchangeable.