The active anti-theft system on Ford vehicles is called the Anti-Theft Alarm System. This system is designed to warn you of unauthorized entry to your vehicle. It is triggered if a door, luggage compartment, or hood is opened without using the key, remote control, or keyless entry keypad. When the alarm is armed, the direction indicators will flash, and the horn will sound if unauthorized entry is attempted. Pressing the panic button on the remote control will stop the horn and signal indicators, but it will not disarm the system.
In addition to the Anti-Theft Alarm System, Ford vehicles also have the SecuriLock Passive Anti-Theft System (PATS). This system is an engine immobilization system that helps prevent anyone from starting the engine without using a coded key programmed to the vehicle. If you are unable to start the engine with a correctly coded key, there may be a problem with the system, and you should contact your Ford Dealer for inspection.
To reset the anti-theft system on a Ford vehicle, you can try the following steps:
1. Remove the positive cable from the battery to place the key in the automobile safely.
2. Turn the key to the on position and then replace the positive cable.
3. Turn the key off and on to reset the anti-theft system.
Please note that these steps may vary depending on the specific Ford model and year. It is always recommended to consult the vehicle’s owner’s manual or contact a Ford Dealer for accurate instructions.
I hope this information helps! Let me know if you have any other questions.
Contents
- How do you reset the anti-theft system?
- What is active anti-theft system?
- How do I take my car out of anti-theft mode?
- What happens when your car goes into anti-theft mode?
- Will anti-theft keep my car from starting?
- How do I know what anti-theft system my car has?
- What triggers Ford anti-theft system?
- How do you unlock the anti-theft system on a Ford?
- How do I clear my anti-theft system?
- Will a car start if anti-theft is on?
How do you reset the anti-theft system?
Manually reset the anti-theft system by turning your car on and off. Insert your key and hold it in the “off” position for 30 seconds. Then, turn the key to “on” and wait at least 10 minutes. Flip the position back to off for 30 seconds and repeat the cycle.
What is active anti-theft system?
Active anti-theft systems
A device falls into this category if you have to activate it–every single time–in order for it to work. Active anti-theft devices include: An alarm that is engaged by you—either by removing a car key or by pushing a button. Manual disabling devices.
How do I take my car out of anti-theft mode?
Put the key in the ignition and rotate forward two clicks to the “On” position that makes the dashboard light up, but don’t try starting the car. Leave the key there for 15 minutes; it doesn’t always take that long, but it can. After that time, check to see if the anti-theft light has gone out, if one was lit up.
What happens when your car goes into anti-theft mode?
One of the primary features of an anti-theft system is its ability to immobilize the vehicle’s ignition. If the system is activated, turning the key or pressing the start button may result in an unresponsive ignition. The engine may not crank, or the vehicle may start but stall immediately.
Will anti-theft keep my car from starting?
Depending on the manufacturer, an anti-theft system can disable certain components that help start the engine. However, it can trigger or malfunction even when nobody’s breaking into the car.
How do I know what anti-theft system my car has?
Your vehicle’s manufacturing manual and website will include all the anti-theft devices. Ask Your Western Financial Group car insurance expert about possible discounts for anti-theft technology features that your car has.
What triggers Ford anti-theft system?
If you switch your vehicle on without a correctly coded key. If the interior sensors detect movement inside your vehicle. If the inclination sensors detect an attempt to raise your vehicle. If someone disconnects the vehicle battery or the battery back-up sounder.
How do you unlock the anti-theft system on a Ford?
First of all, insert the key into the car door on the driver’s side. If you have a keyless technology, prefer using the physical key this time around. Turn the key to unlock the system, but do not take the keys out. Let the key stay in the keyhole for about another 20-30 seconds.
How do I clear my anti-theft system?
Manually reset the anti-theft system by turning your car on and off. Insert your key and hold it in the “off” position for 30 seconds. Then, turn the key to “on” and wait at least 10 minutes. Flip the position back to off for 30 seconds and repeat the cycle.
Will a car start if anti-theft is on?
Most vehicles with an anti-theft system come with ignition keys with a coded transponder chip that sends a signal to the receiver in the ignition switch. If the anti-theft system sends a no-go signal to the PCM, the engine computer will disable the ignition, fuel system, or starter.
