What is line lock on Dodge?

Line Lock on Dodge
Line lock is a feature available on certain Dodge vehicles, particularly sport-oriented cars like the Dodge Challenger and Dodge Charger. It is primarily used for drag racing and show purposes. When the line lock is activated, it locks the front brakes of the vehicle, allowing the rear wheels to spin freely while the front brakes can be controlled with the brake pedal . This feature is useful for performing burnouts and achieving a good launch at the race track.
Line lock can be used to perform rolling burnouts by proportionally increasing the front brake pressure and the throttle to keep the car at a steady speed . This causes the rear tires to slip and spin faster than the front tires, resulting in a burnout.
Line locks can also be installed on the rear brake lines, preventing fluid pressure from being transferred to the rear wheels when activated . This allows the rear wheels to spin freely while the front brakes remain under control.
It’s worth noting that line lock may be available as a factory option on some Dodge vehicles, while others may require aftermarket installation. The specific activation method may vary depending on the vehicle model and year, but it can typically be done through the vehicle’s infotainment system or by following instructions displayed on the dashboard .
Please consult your vehicle’s manual or reach out to a Dodge dealership for specific information on how to use the line lock feature on your particular Dodge model.
I hope this helps! Let me know if you have any other questions.

What is the strongest Dodge Challenger?

2023 Dodge Challenger SRT Demon 170
20 Fast Facts of 2023 Dodge Challenger SRT Demon 170:
Most powerful muscle car in the world, producing 1,025 horsepower and 945 lb. -ft. of torque. World’s quickest production car, reaching 0-60 in 1.66 seconds with the highest G-force acceleration of any production car at 2.004 gs.

How do I activate line lock on Tazer?

Plus. Button here for cruise. Control when you do that will pop up you can let go of that as soon as you press it but you do need to continue holding. Down this left arrow.

How do you use the line lock on a Dodge Charger?

Down to about 2,000 psi. And you’re holding okay. Now I’m letting go with a brake. And applying throttle. There we go so easy to do line lot and now we’re gonna go into launch control.

How do you set up a line lock?

Well this is likely going to be in here permanently. So feel free to use thread locker on the bolts. Be sure to press the brake pedal.

Does line lock void warranty?

Given this, it’s remarkable that Ford confirms using Line Lock won’t invalidate the warranty.

Which challenger has line lock?

The Challenger SRT Hellcat comes with a supercharged 6.2L HEMI SRT V8 Engine with 717 horsepower and 656 LB-FT of Torque. Along with a functional Dual Snorkel Hood with Cold Air Intake. The Line Lock, Launch Control, and After-Run Chiller will help you blow the doors off the competition at the track.

Is line lock worth it?

It saves the rear brakes and rotors, and is easier on your engine and drive train when doing burnouts. The reason is your engine is not pulling against the rear brakes so there is not as much torque against the drive line parts to get the tires turning.

Do scat packs have line lock?

So really what you’re doing is you’re just bowling through the rear brakes. And it causing the back tires to spin while you’re heating up the rubber. So that the car will stick right.

Does line lock go on front or rear brakes?

The line-lock solenoid gets installed in-line into the front brake hydraulic circuit or rear-brake circuit if you’re racing a front-wheel-drive car.

What is the purpose of a line lock?

And want apply your brakes. And then you activate your line lock.