Gear Limit on Dodge Ram
The gear limit feature on a Dodge Ram allows the driver to set the maximum gear the transmission will shift into. This can be useful for various purposes, such as maintaining RPMs for extended around-town driving, engine braking downhill while towing, or overriding cylinder deactivation. The gear limit switch can be toggled using the + and – buttons on the steering wheel, and it will display the highest gear the transmission can shift into. For example, setting it to 5 will prevent the transmission from going above 5th gear, even though it will still start in 1st gear and shift up or down through the gears normally.
To turn off the gear limiting feature, you can press the + button until you hit the desired gear, then press + one more time to return to normal automatic shifting.
The gear limit feature is not the same as manual shifting; it simply limits the highest gear the transmission will shift into, rather than allowing manual upshifting on demand.
The gear limit feature can be particularly useful for towing, maintaining RPMs, and engine braking, but its usefulness may vary based on personal preference and driving habits.
Overall, the gear limit feature provides drivers with additional control over the transmission’s shifting behavior, offering flexibility in various driving scenarios.
If you have any further questions or need more information, feel free to ask!
Contents
- What is the capacity of the bed on a Ram 1500?
- What does the plus and minus mean on my automatic gear shift?
- What is the best gear ratio for RAM?
- What’s the most gears a truck can have?
- What is the plus and minus on gear shift Dodge Ram?
- How many gears does a Dodge Ram 1500 have?
- How much can my truck bed hold?
- How do you calculate the capacity of a truck bed?
- What does L mean on gear shift?
- What is the towing capacity of the 5.7 Hemi?
What is the capacity of the bed on a Ram 1500?
Payload Capacity: More Than Just Numbers
The Ram 1500 isn’t just about power; it’s about smart capacity. The maximum payload of the 2021 model can fluctuate from 1,240 to 2,320 pounds, shaped by the configuration you choose.
What does the plus and minus mean on my automatic gear shift?
And going into a nasty. Slide. Well take a look inside your car and if you look near the gearshift. If it has a plus or minus you have the tool you need. For winter road warriors driving in the snow.
What is the best gear ratio for RAM?
FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic.
What’s the most gears a truck can have?
It ranges from nine all the way up 18, though commonly semis will have two reverse gears and ten forward gears.
What is the plus and minus on gear shift Dodge Ram?
The plus sign (+) is typically used when you want to upshift or go to a higher gear. For example, if you’re driving in third gear and want more power, you would shift up to fourth gear by moving the lever to the right into the + position. The minus sign (-) is used when you want to downshift or go to a lower gear.
How many gears does a Dodge Ram 1500 have?
AVAILABLE 5.7L HEMI® V8 ENGINE WITH eTORQUE
With the TorqueFlite® 8 Eight-Speed Automatic Transmission.
How much can my truck bed hold?
Subtract your truck’s curb weight from its GVWR—that’s your payload capacity! For example, if your truck’s GVWR is 9,000 lbs and it weighs 5,000 lbs empty, then your payload capacity is 4,000 lbs. You can put 4,000 lbs of people and stuff in your truck. Note: Payload capacity includes passengers!
How do you calculate the capacity of a truck bed?
Determining Your Payload Capacity
Calculating your vehicle’s maximum payload is straightforward. You take the GVWR and subtract your vehicle’s curb weight. The remainder is your total maximum payload. Remember that this doesn’t just mean the weight of whatever is in your truck bed.
What does L mean on gear shift?
Low
The “L” on the gear shift stands for “Low.” What is the “L” gear used for? Low gear is used when you want the engine power high and the vehicle speed low. This limits stress on your brakes while allowing you to take advantage of your car’s full power in situations like towing and hilly driving.
What is the towing capacity of the 5.7 Hemi?
12,750 pounds
The 2022 RAM towing capacity can vary depending on the engine you select, however with the 5.7L HEMI® V8, you can pull an impressive 12,750 pounds. There are five engines you can select from, that offer you a variety of efficiency and speed options to select from.