The term “PCD” stands for Pitch Circle Diameter. It refers to the measurement of how many wheel nuts or wheel bolts a vehicle has on each wheel and how far apart those nuts or bolts are placed in millimeters. For example, a vehicle with a 5×120 PCD will have five wheel nuts or wheel bolts, with each spaced 120mm apart.
The PCD is an important consideration when determining if a wheel will fit a car. If there is even a few millimeters difference between the vehicle’s PCD and the wheel’s PCD, the wheel will not be able to safely fit onto the vehicle.
Unfortunately, the specific PCD for Ford wheels is not mentioned in the search results provided. It is recommended to consult the manufacturer’s recommended wheel size and allowable sizes for Ford vehicles, as well as reference books or guides that provide information on wheel sizes and PCD for different car makes.
Please note that the information provided is based on the search results available and may not cover all Ford models or modifications. It is always best to consult official sources or contact a Ford dealership for accurate and up-to-date information on wheel PCD for specific Ford models.
Contents
Is PCD the same as offset?
PCD is the amount of mounting holes in the wheel and the width apart of the mounting holes. Offset is the distance of the hub mounting surface to the centre line of the wheel, see below for a full explanation. These measurements are required when fitting aftermarket or non standard wheels.
What vehicles have a pcd of 5×114 3?
The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.
What is 4×100 pcd mean?
PCD (Pitch Circle Diameter) Explained:
e.g: 4×100 means the wheel has 4 bolt holes and the diameter of the imaginary circle through the bolt holes is 100mm.
Is PCD the same as bolt pattern?
Bolt pattern (a.k.a. bolt circle) is composed of 2 measurements: number of lugs and “Pitch Circle Diameter” (PCD). PCD is the diameter of an imaginary circle formed by the center point of each wheel lug. The first number indicates the number of lugs. The second indicates the diameter of the circle.
Can you change wheel PCD?
Did you buy a set of wheels that doesn’t fit on your car? Don’t worry about it we can just change your PCD of your wheels and make sure its fits on your car.
How do I find out the PCD of my wheels?
This result will give us the pcd measurement popular measurements include 100 millimeters 112 millimeters 140 millimeters and 165 millimeters. If you require any assistance in identifying your wheels.
What is the PCD for Ford?
Stud pattern identification
| Type | No. of studs | PCD (mm) |
|---|---|---|
| Ford Falcon | 5 | 114.3 |
| Ford 4 stud | 4 | 114.3 |
| Ford 100 | 5 | 140 |
| LandCruiser | 6 | 139.7 |
Is PCD marked on rims?
PCD (Pitch Circle Diameter)
They are usually written in the hundred or near the hundred beside the number of holes such as: 4×100, 4×120.
What does PCD mean in wheels?
Pitch Circle Diameter
What does PCD mean? The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes.
What is the PCD code of a wheel?
PCD is measured in mm. e.g: 4×100 means the wheel has 4 bolt holes and the diameter of the imaginary circle through the bolt holes is 100mm. These details are shown in the ‘Wheel Specifications’ section on the main product page.
