Dodge Challenger Lug Pattern
The lug pattern for the Dodge Challenger is A5 lug by 115 mm wheel bolt pattern. This means that there are 5 wheel studs spaced out at 115 mm from the edge of one to the center of the one diagonally across from it. The Challenger uses 50 mm long, M14 X1.5 studs with a 16.02mm knurl. The factory recommended torque for tightening the lugs is 135 Ft-lbs. It’s important to tighten them working in a crisscross pattern to ensure the tire goes on squarely. An under torqued lug could cause the tire to shake and damage a stud, eventually leading to the tire falling off, while over-torquing could warp the rotor and have adverse effects on the drivability.
Conclusion
The Dodge Challenger has a 5 lug by 115 mm wheel bolt pattern, with specific recommendations for stud length, knurl size, and torque for tightening the lugs. Following these specifications is crucial for the proper functioning and safety of the vehicle.
Contents
- Are Dodge and Chevy bolt patterns the same?
- What is the bolt pattern on a 2010 Challenger?
- What cars have 5×115 bolt pattern?
- What lug pattern does Dodge use?
- Is 8×165 the same as 8×6 5?
- What does 5×115 convert to?
- Is 5×114 the same as 5×4 5?
- Is Dodge and Chevy 8 lug the same?
- What vehicles does 5×114 3 fit?
- Will a 5×114 3 fit a 5×115?
Are Dodge and Chevy bolt patterns the same?
If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs. In fact I think that’s what you’ll run into going from Chevy to dodge.
What is the bolt pattern on a 2010 Challenger?
All Dodge Challengers manufactured from 2008 onwards have a bolt pattern of 5 x 4.53 inches (5×115 mm).
What cars have 5×115 bolt pattern?
Wheels with a 5×115 bolt pattern can be found on a ton of great vehicles, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs and more.
What lug pattern does Dodge use?
The Dodge Charger bolt pattern for the years 1966-1978 is 5×4.5″ (5×114.3mm). Model years 1982-1987 have a Dodge Charger lug pattern of 4×3.94″ (4x100mm). Lastly, the Dodge Charger bolt pattern for the model years 2005 to present are 5×4.53″ (5x115mm).
Is 8×165 the same as 8×6 5?
5 (8×165. 1) Bolt Pattern Wheels. This bolt pattern is known by two different numbers, but there is no real difference between the fitments except that one is written in inches and the other in millimeters.
What does 5×115 convert to?
BOLT PATTERN CONVERSION (mm to inches)
| COMMON REFERENCE | MILLIMETERS | INCHES |
|---|---|---|
| Five on One Twelve | 5×112 | 5×4.41 |
| Five on One Fourteen Point Three — or — Five on Four and a Half | 5×114.3 | 5×4.5 or 5×4 1/2 |
| Five on One Fifteen | 5×115 | 5×4.52 |
| Five on One Twenty | 5×120 | 5×4.72 |
Is 5×114 the same as 5×4 5?
While the numbers are different, the wheels themselves feature the same exact bolt pattern. So if you’re on the hunt for 5×4. 5 wheels and someone says you really need a 5×114. 3, you’ll know that you’re both talking about the same thing.
Is Dodge and Chevy 8 lug the same?
If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs. In fact I think that’s what you’ll run into going from Chevy to dodge.
What vehicles does 5×114 3 fit?
The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.
Will a 5×114 3 fit a 5×115?
So let’s answer the question of F5. By 114.3 Wheels can fit on a five by 115 volt pattern the simple answer is yes. It’s possible to fit those wheels on that bolt pattern.
