AHG Auto Service » Make » Acura » What is Acura low speed braking control?

What is Acura low speed braking control?

Acura Low-Speed Braking Control
Acura’s Low-Speed Braking Control is a safety feature designed to enhance driving confidence and prevent low-speed collisions. It utilizes the vehicle’s front and rear parking sensors to detect potential low-speed collisions. When driving forward or backing up at low speeds, the system is designed to detect objects in front of or behind the vehicle and apply the brakes to prevent a collision or mitigate its effects. It issues audible and visual alerts to the driver to warn of potential collisions and can apply the brakes if necessary to reduce the severity of low-speed impacts [[9]].
The system is intended to keep the brakes applied for a short period of time and then release them. It can also be turned off using the Safety Support Switch, but it will default to on after the vehicle is turned off and restarted.
Users have reported occasional issues with the Low-Speed Braking Control system, such as warnings related to braking performance and parking sensor problems. If you experience persistent issues with the system, it is advisable to consult with an authorized Acura dealer to have them take a look at it.
Overall, Acura’s Low-Speed Braking Control is a valuable safety feature that aims to provide drivers with greater confidence while driving or backing up at low speeds by helping to prevent or mitigate low-speed collisions.

Does Acura have automatic braking system?

Collision Mitigation
Using both radar and camera, it’s programmed to provide visual alerts when it determines a crash is possible and if you don’t react, it can automatically brake for you 61.

How do you turn off auto braking on a Acura MDX?

To turn CMBS off, press and hold the CMBS OFF button for 2 seconds – located on the panel to the left of the steering wheel. The system will beep and message will appear in the MID: Collision Mitigation Braking System OFF. Press and hold the button again to turn the system back on.

What is low speed automatic braking?

Low Speed Front Automatic Braking. This feature automatically applies the brakes to help reduce a collision’s severity if the vehicle is traveling at a low speed and the system detects that a front-end collision situation is imminent.

What is the difference between brake assist and automatic braking?

Where do AEB and BAS differ? AEB doesn’t require the driver’s foot pedal action to initiate the braking. It applies the brakes automatically. It’s important to note this difference because BAS does require the driver to step on the brakes to benefit.

How do I turn off low speed braking control?

When moving between one and six miles per hour in the unlikely event that you want to turn this valuable feature off here’s how roll the selector wheel on the right side of the steering wheel to

What is low speed braking control on Acura MDX?

Low-Speed Braking Control – Low-Speed Braking Control can help bring your MDX to a stop when traveling at low speeds by automatically applying brake pressure when the system determines that either a frontal or rear collision is unavoidable.

What is low speed braking control?

The Feature: When driving forward or backing up at low speeds, the Low-Speed Braking Control System68 is designed to detect objects in front of or behind the vehicle, and apply the brakes to prevent a collision or mitigate its effects. The system functions when the vehicle is moving at speeds between 1 and 6 mph.

At what speed does automatic braking work?

At speeds between 5 and 50 mph, Automatic Emergency Braking (AEB) can help you avoid or reduce the severity of a collision† with a detected vehicle you’re following using camera technology. It can automatically provide hard emergency braking or enhance the driver’s hard braking.

What is control braking used for?

Typically used if there is a change in the speed limit, a construction zone or a school zone, controlled braking is utilized when you must slow down and maintain a slower speed. Here, you will ease off the accelerator and gradually apply your brakes until you have reached the appropriate speed.

Which Hondas have low speed follow?

Honda Sensing® and Adaptive Cruise Control With Low Speed Follow come standard on almost every Honda vehicle (2020 or newer).

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment