What is a Acura TPMS system error?

Acura TPMS System Error
The TPMS (Tire Pressure Monitoring System) error in Acura vehicles can be caused by various issues related to the tire pressure sensors. Here are some key points to consider:
Causes of TPMS System Error:
– The TPMS error message can be triggered by issues such as dead batteries in the tire pressure sensors, small leaks in the TPMS stem, or a malfunction in the TPMS system itself.
– The error message may indicate a system function error, and it is often associated with damaged or malfunctioning tire pressure sensors.
Diagnosing and Resolving the Issue:
– When encountering a TPMS error, it is recommended to have the tire pressure sensors diagnosed to determine the cause of the error. This can be done at a service center or by using diagnostic tools.
– In some cases, resetting the TPMS system may resolve the error. This can be done by following specific procedures outlined in the Acura owner’s manual, such as driving for a certain duration or using the TPMS reset button.
Replacement of Sensors:
– If the TPMS error is attributed to dead batteries in the tire pressure sensors, replacing the sensors may be necessary to resolve the issue.
– It’s important to consider using OEM sensors for replacement, as they are designed to work seamlessly with Acura vehicles.
In summary, the TPMS system error in Acura vehicles can be caused by issues related to tire pressure sensors, and diagnosing and resolving the specific cause of the error is essential for ensuring the proper functioning of the TPMS system.

What does TPMS system error mean?

WHAT IT MEANS & WHAT YOU NEED TO DO. The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.

Where is the Acura TPMS reset button?

Additionally, you can also utilize the TPMS reset button located under your steering wheel. Reference your owner’s manual to find its exact placement. With the vehicle off, turn the key to “on.” Now, press and hold the reset button until it blinks three times.

How do you reset the TPMS system error on a Acura?

Turn the key to “On” (one position to the right), but don’t start the car. Now hold down the “TPMS Reset” button until the flashing tire pressure light blinks three times. Start the engine and wait 20 minutes. Check your owner’s manual if you have trouble finding the reset button.

How do I get rid of TPMS warning?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

What does check TPMS system mean on Acura?

Any time that the TPMS warning light comes ON, there is a possible low tire pressure condition. Tire pressure can drop due to cold conditions, and this drop in pressure may cause the TPMS light to come ON. As the tire warms up under normal driving conditions, the light may turn OFF.

Why is my TPMS light on but tires are fine?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

Can you drive with TPMS error?

As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.

How do I fix my TPMS sensor error?

With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh.

How do you fix a TPMS system?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.

How much does it cost to fix a TPMS sensor?

On average, replacing a TPMS sensor can range from $50 to $200 per tire, with the average cost being around $100 to $150 per tire. However, the cost can be much higher, mainly if the vehicle requires specialized sensors or if you get the replacement done at a dealership.