What gears are in Ford Bronco?

The Gears in the Ford Bronco
The Ford Bronco is equipped with a unique feature called the “crawler” gear, which is designed specifically for low-speed maneuvers and off-road driving. The crawler gear is denoted by a “C” on the manual transmission shift pattern. It allows the driver to comfortably cruise at ultra-low speeds without having to slip the clutch. The crawler gear has a ratio of 6.588:1, compared to 4.283:1 for the first gear. This shorter gearing multiplies the amount of torque coming from the engine, resulting in increased wheel torque. The crawler gear also provides a crawl ratio of 94.7:1, which is beneficial for navigating extreme terrain.
In addition to the crawler gear, the Ford Bronco is equipped with six forward gears and reverse, making it a seven-speed manual transmission. The Bronco’s manual transmission is different from traditional seven-speed transmissions, as the higher gears are for lower cruising speed RPMs and greater top speeds. The crawler gear acts as an ultra-low first gear, providing maximum control at incredibly low speeds.
It’s worth noting that the Ford Bronco’s crawler gear is accessed by moving the shift lever to the left and down, while reverse gear requires moving the shifter to the left and up. Engaging the crawler gear requires pulling up on the locking ring below the shift knob.
The Ford Bronco’s crawler gear, along with its other off-road features, contributes to its off-road prowess and ability to conquer rough terrain.
I hope this information helps! Let me know if you have any other questions.

Which Bronco engine is better?

Power – At the end of the day, the 3.0L V6 Raptor engine is by far the most powerful and most rapid engine of the three. No matter the REV range and the gear you are in, the V6 Twin Turbo will always be the most capable.

Should I get 3.73 or 4.10 gears?

There is only a 10% difference between 4.10 and 3.73 gears. Unless you need to tow heavy loads, I would keep the 3.73 gears. Or maybe if you are going to big, big tires. Otherwise you probably won’t notice the difference.

What are 3.73 gears good for?

To keep it simple, if you want a daily driver and want to save a little on fuel and you care about performance but don’t want screaming RPM, then taller gears like the 3.73 ring and pinion are the way to go.

What is the C on Bronco manual?

Denoted by a “C” on the Bronco’s manual-transmission shift pattern, the crawler gear is a first gear with an even higher ratio, Fenske said. In the Bronco, the crawler gear has a ratio of 6.588:1, compared to 4.283:1 for first gear. That allows for more wheel torque, albeit with a lower top speed.

What is the granny gear?

Put most basically, a granny gear is a gear with a really high gear ratio. The standard ratio for the first gear in a transmission is anywhere from 2.00-3.00:1. A granny gear, on the other hand, can be twice as large. For example, a classic Ford Bronco with a T-18 transmission has a first gear ratio of 6.32:1.

What is the base gear ratio for the Ford Bronco?

The base model automatic comes with 3.73 gearing. The manual comes with 4.46.

What is the L gear on Ford Bronco?

The L button holds the vehicle in lower gears and is recommended to be used on hilly or mountainous roads, or when towing a trailer. It is not “low range,” like a transfer case, but it tells the vehicle to choose lower gears when possible.

What does the C gear mean?

C1 and C2 are for crawling. Sometimes trucks have to haul very heavy loads and to get up to speed without stalling a lot, you start in crawl gear. The gears are both in US trucks and EU trucks. I made a peek a boo into a Scania truck parked near me and sure enough, it got a C on the shifter knob.

How many gears does Ford Bronco have?

A 10-speed automatic transmission with Trail Control is standard on the Outer Banks, Wildtrak, and First Edition models of the 2021 Ford Bronco. While a 7-speed manual transmission is standard on the Base, Big Bend, Black Diamond, and Badlands models.

What is C gear in Bronco?

What is a crawler gear? As you can see from the Bronco’s shift knob, there is a C (crawler gear) and 1-6 gears. It is more of a 6 speed + crawler gear than an actual 7 speed manual. The “C” acts as an ultra low first gear.