What fuse is the tail light on the Acura RDX?

Acura RDX Tail Light Fuse Location
The tail light fuse on the Acura RDX is located in the passenger side fuse box under the hood. There are two fuses that have been reported to work for the tail lights:
– Fuse #5 – 7.5 amp
– Fuse #10 – 15 amp
One user reported that replacing Fuse #5 (7.5 amp) in the passenger side fuse box under “SMALL LIGHT” restored the tail lights. Another user mentioned that Fuse #10 (15 amp) in the same fuse box also worked for their tail lights.
It’s important to note that the fuse for the tail lights may not be explicitly labeled as “tail light” in the fuse box, and it may be listed under a different name such as “Small Lights (Exterior)” in the manual. Therefore, it’s essential to check these specific fuses even if they are not explicitly labeled as “tail light” fuses.
In summary, the tail light fuse for the Acura RDX is located in the passenger side fuse box under the hood, and it can be either Fuse #5 (7.5 amp) or Fuse #10 (15 amp) that controls the tail lights.
If you have any further questions or need additional assistance, feel free to ask!

Where is the fuse for the brake light?

The first thing to check is whether or not the brake light fuse has blown. This fuse is usually located in the fuse box under the hood, and it’s relatively easy to check. Just remove the fuse and hold it up to a light – if the wire inside is broken, then you’ll need to replace the fuse.

Can a fuse cause a tail light to go out?

If you have a malfunctioning tail light, it could be a matter of a blown fuse. The fuses work with your car’s electrical panel and if they’re blown, it can cause several lights to stop working. Replace the fuse and see if this helps. Another issue may be related to your wiring.

Why are my tail lights not working but my headlights are?

The headlight assembly could also have faulty pins, which can cause connection issues with the wiring harness. Water, dust, and air allow rust and corrosion to form, which can affect the tail light socket’s ability to conduct power to the tail light bulbs.

How do I know if my tail light switch is bad?

Brake lights stay on.
If your brake lights remain illuminated even when you’re not pressing the brake pedal, it’s a clear sign of a failing brake light switch. This not only poses a risk to your safety but also drains your vehicle’s battery.

How do you check a tail light fuse?

By hand or pliers. But a much faster way of checking fuses is by using a test light. There are two metal points on the back of each fuse. Ground the test lamp. And touch those points.

What module controls tail lights?

The Light Control Module controls all of the lights on the vehicle, including headlights, taillights, turn signals, brake lights, fog lights and hazard lights.

Which fuse controls tail lights?

Tail light fuse is sometimes called the “parking lamp” fuse and it may be located in the underhood fuse panel, which requires the removal of a cover. On the inside of the cover, the fuse position will be indicated.

Do tail lights have a fuse?

If the bulb or socket isn’t the problem, the next check is the fuse or the light switch. Fuses for everything electrical, including your tail lights, are always found in the fuse box. They are usually located under the hood or in the cabin. Fortunately, you can fix this type of problem by replacing the fuse.

Why is my tail light not working?

If the bulb or socket isn’t the problem, the next check is the fuse or the light switch. Fuses for everything electrical, including your tail lights, are always found in the fuse box. They are usually located under the hood or in the cabin. Fortunately, you can fix this type of problem by replacing the fuse.

Are brake lights and tail lights on the same circuit?

Any loose, frayed, damaged, or otherwise faulty wiring in your tail light system will usually not affect your brake lights because they are powered by different wiring systems.