What front axle is in a Ford Excursion?

Front Axle in a Ford Excursion
Based on the information from the search results, the front axle in a Ford Excursion is a Dana 50. The Dana 50 axle consists of a Dana 44 differential in a Dana 60 housing with 30 spline axles. It is important to note that the Dana 50 front axles were used in the Excursion 4×4 trucks from 2000 to 2005, and production of these front axles ended when the Excursion was dropped by Ford at the end of the 2005 model year [[6]].
If you have any further questions or need additional information, feel free to ask!

How do you tell if I have a Dana 70 or 80?

There should be a metal tag underneath one of the cover bolts, that will identify the axle model and ring/pinion ratio. If it’s not there, take a picture of the differential cover-a shop that specializes in truck or four-wheel-drive parts should be able to identify it by its unique shape..

How do I identify my Ford Dana 44 front axle?

Many Dana axles have the model ID cast into the fins or centersection. Look for a “44” or “60” cast into the reinforcement ribs. The number can usually be found on the lower right side rib below the differential cover, but it may also be found on other ribs or on top of the main cast structure.

How do I identify my Ford Dana 60 front axle?

Many Dana axles have the model ID cast into the fins or centersection. Look for a “44” or “60” cast into the reinforcement ribs. The number can usually be found on the lower right side rib below the differential cover, but it may also be found on other ribs or on top of the main cast structure.

How do I know if I have a Dana 50 or Dana 60 front axle?

The best way to determine what axle model you have is to look at the axle ID tags. The Dana Axle Bill of Material Number will tell us what your axle model is, the ratio, and what parts your particular axle was built with. There should be a metal Dana BOM Tag held on by two of the diff cover bolts.

What trucks have Dana 60 front axles?

Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.

What years did Ford use Dana 60?

2005-2016 Ford Dana Super 60 Front Axle Identification IDN-118. Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks.

What vehicles came with a Dana 44 front axle?

Dana 44Identification:Roughly D-shaped cover with 10 bolts, 10 3/8 inches wide. Often (but not always), “44” is cast into a reinforcing rib of the differential housing. Found In:Front or rear of numerous Chevy, Dodge, Ford, Jeep, International, and Isuzu models.

What did Dana 70 come in?

The first Dana 70 front axle was used in 1958 by Dodge in the W300, in both 4.88 and 5.87 ratios. International started using Dana 70 front axles in the late 1960s. Both companies used Dana 70 front axles until the mid-1970s (Dodge W300 pickup up until 1978, discontinued in 1979).

Is a Dana 44 stronger than a Dana 35?

It may not sound like a big difference, but it’s actually a pretty big. Although the Dana 44 has a larger differential, and stronger axle shafts, it shares the same weak axle tubes with the Dana 35. You could always truss the axle to make it stronger, but at the end of the day, it’ll still have really weeks tubes.

Do I have a Dana 44 or 60?

Measure Your Axle
Although the Dana 44 and Dana 60 differential covers look similar, their sizes are significantly different. The Dana 44 differential cover will measure about 9 1/2 inches wide and 10 1/2 inches tall, while the Dana 60 differential cover will measure about 11 1/4 inches wide and 12 inches tall.