Front Axle in 2001 Dodge Ram 1500
The 2001 Dodge Ram 1500 used a Dana-Spicer, Model 44 216 Front Beam-Design Iron (FBI) axle. This axle was used on all 1994 to 2001 Ram 1500 4×4 1/2 Ton trucks and 1994-1997 gas V8 powered, light duty Ram 2500 trucks with Gross Vehicle Weights (GVW) under 8800 pounds.
This information is based on the search result from Source.
Contents
- What front axle is in a 2001 Dodge Ram 2500?
- What year did Dodge stop using Dana axles?
- Does Ram use Dana axles?
- What is the axle ratio for a 2001 Dodge Ram 1500?
- How do I find my Ram 1500 axle ratio?
- What axles does a 2001 Dodge Ram 1500 have?
- What Dodge trucks have Dana 60 axles?
- What years did Dodge use Dana 60?
- What trucks used a Dana 60 front axle?
- What is the difference between 4.7 and 3.73 axles?
What front axle is in a 2001 Dodge Ram 2500?
Dodge Ram 2500 and Dodge Ram 3500 4×4 trucks for the model years of 2000, 2001, and 2002 all use Dana-Spicer Model 60 248 Front Beam Iron (FBI) drive axles. Outwardly, these solid beam axles look very similar to the preceding models; however, relatively few parts were carried over from the 1999 and prior axles.
What year did Dodge stop using Dana axles?
Class 3 trucks have been common users of the Dana 80 since it was first manufactured in 1988. Dodge used the axle selectively in class 2 trucks from 1994-2002. Ford has made use of the axle in class 4 trucks until 2005 when the Dana S 110 was phased in.
Does Ram use Dana axles?
In addition to axles, Dana supplies cylinder head gaskets for the 2021 Ram 1500 TRX. Dana is a world leader in providing power-conveyance and energy-management solutions that are engineered to improve the efficiency, performance, and sustainability of light vehicles, commercial vehicles, and off-highway equipment.
What is the axle ratio for a 2001 Dodge Ram 1500?
For 1994-2001 Ram 1500 trucks with standard axles, 3.54 ratio is a -1, 3.92 ratio is -2, and 4.10 ratio is -3. For 2000 Ram 1500 trucks with off-road axles, the 4.10 ratio is -1.
How do I find my Ram 1500 axle ratio?
you should be able to find this via the build sheet, VIN search, or by reading the tag on the rear differential. If it is a 4 wheel drive, the front and rear ratios will be the same, in the event that your tag has rotted away, your front will be more likely still in tact.
What axles does a 2001 Dodge Ram 1500 have?
The rear axle is a chrysler 9 1/4. The front is a dana 44 or 216 FBI whatever you want to call it.
What Dodge trucks have Dana 60 axles?
Rear axle
- 1966–1970 Coronet & R/T.
- 1966–1972 Charger & R/T.
- 1968–1972 Super Bee.
- 1970–1971 Challenger.
- 1963–1993 Dodge Ram 250 and 350.
- 1994–2002 Dodge Ram 2500 (V8 only)
- 2004–2006 Dodge Ram SRT-10.
What years did Dodge use Dana 60?
The Model 60 as used by Dodge from 1975 to 1993 has very durable greaseable king pins and disc brakes. The wheel bearings are serviceable and the dead-spindle configuration allows the use of lockout hubs.
What trucks used a Dana 60 front axle?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
What is the difference between 4.7 and 3.73 axles?
Your engine is going bang more often with 4.7 than with 3.73 for any given speed. So, unless that additional torque is necessary to move something, the vehicle, with or without a trailer, etc. you are turning and burning more fuel for a given speed.
