What fluid goes in a Ford transfer case?

Ford Transfer Case Fluid
Ford transfer cases require specific types of fluid to ensure proper operation and longevity. The correct fluid for Ford transfer cases has evolved over the years, and it’s essential to use the appropriate type for your specific model and year.
Fluid Type: The latest version of MerconV Fluid is NOT approved for use in 4×4 Transfer Cases. For later model years, the transfer case fluids are VERY specific.
Recommended Fluid: Ford Motor Company recommends using Motorcraft Synthetic Blend MERCON V Automatic Transmission and Power Steering Fluid for transfer cases in Ford vehicles. This fluid is formulated with high-viscosity index, premium-quality, synthetic/hydroprocessed base oils and specially designed performance additives.
Fluid Replacement: It’s recommended to replace the transfer case fluid at least every 30,000 miles to prevent premature wear and damage caused by contaminated or broken-down fluid.
Fluid Characteristics: Most transfer cases are filled with an automatic transmission fluid, which is usually red in color. Some transfer cases use a thicker gear oil, while others use a specialized fluid that is specifically designed for transfer case use.
It’s important to consult the specific recommendations for your Ford vehicle to ensure the correct fluid type for your transfer case.

What is Motorcraft transfer case fluid equivalent?

Valvoline QU90046 Transfer Case Fluid
QU90046 1 Quart Valvoline Full Synthetic Transfer Case Fluid is the recommended transfer case oil replacement for XL-12 Motorcraft Oil for most 1980 to current Ford 4×4 trucks and truck based SUVs…

What fluid goes in transfer case?

automatic transmission fluid (ATF)
Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants. It is important to regularly inspect the transfer case for any damage, leaks, or other concerns.

Is Motorcraft Mercon LV the same as Mercon V?

It is for all 2008 and newer Ford vehicles. Mercon V is not compatible with Mercon LV. I believe the LV is much thinner, if your car originally required V but the spec has been updated to LV I would stick with mercon V, as the thinner fluid could cause issues in transmissions made for thicker fluids.

Can I use Mercon instead of Mercon LV?

Compatibility and Performance
One of the critical aspects to consider is compatibility. All Mercon fluids are generally incompatible with Mercon LV.

Is transmission and transfer case fluid the same?

Both fluids serve as cooling lubricants for their respective systems. However, the two lubricants are different. While some transfer cases use automatic transmission fluid instead of dedicated transfer case fluid, the two are generally not interchangeable.

Can you put ATF fluid in a transfer case?

You need to clean it with oil flush as well. No need to do that, just drain and refill with ATF. ATF is used with chain-driven transfer cases, gear lube is used with gear-driven transfer cases. And don’t feel rushed to do it, gear lube isn’t going to wreck your TJ’s chain driven transfer case.

Can I use Mercon V in my transfer case?

Don’t Use Mercon V in your Transfer Case (exploding T.C.)

What happens if I use Mercon LV instead of Mercon V?

In summary, using Mercon LV instead of Mercon V is not recommended due to their differing viscosities, chemical compositions, and intended use in specific types of transmissions. Always consult your vehicle’s owner’s manual or a professional mechanic before making a decision.

How many quarts of fluid do I need for a transfer case?

Transfer Case Fluid Capacity and Specification (If Equipped)

Variant	Quantity
All.	1.9 qt (1.8 L)

Can I use dexron 6 in my transfer case?

It was designed to be backwards compatible for transmissions, not t-cases. This is correct, GM recommends against using Dexron 6 in transfer cases and power steering systems that originally called for Dexron 3.