What engines came in the Ford Torino?

Overview of Ford Torino Engines
The Ford Torino was produced by the Ford Motor Company for the North American market between 1968 and 1976. It was a midsize car and had a successful racing heritage, being used as a base for Ford’s NASCAR entrants.
The Torino came with a wide range of engine options, providing power and performance to suit different preferences. Here are some of the engines that came in the Ford Torino:
1. Inline 6: The 1971 Ford Torino had an inline 6 engine with a displacement of 4097 cc (4.1 L) and produced 145 horsepower.
2. Small Block V8: The Torino was equipped with various small block V8 engines, including the 302 cubic inch (5.0 L) engine. The first-year 302 engine was rated at 210 horsepower, while the 289 engine put out 195 horsepower.
3. Big Block V8: The Torino also offered big block V8 engines for those seeking more power. These included the 390 cubic inch (6.4 L) and the 428 cubic inch (7.0 L) Cobra Jet engines. The 428 Cobra Jet engine was known for its performance and was introduced in 1969.
4. Cobra-Jet Engines: The Torino GT models were fitted with powerful Cobra-Jet engines. These included the 428 cubic inch (7.0 L) Cobra-Jet engine and the 429 cubic inch (7.0 L) Cobra-Jet engine.
5. Super Cobra Jet: The Super Cobra Jet was a high-performance engine option available for the Torino GT. It featured a hood scoop designed to maximize air intake, cast pistons, an upgraded crankshaft and connecting rods, and an oil cooler.
Please note that the availability of specific engines may vary depending on the model year and trim level of the Ford Torino. For more detailed information on engine specifications, you can refer to the Ford Torino engine specifications on the Ford Torino Cobra Home Page.
I hope this information helps! Let me know if you have any further questions.

Was the Ford 428 a good engine?

With the longer stroke, the 428 was a better street motor. All 427 engines were racing motors, period. The 428 gives a lot of torque all through the rpm range. Ford even put a single 4 barrel 428 with 390 heads and intake, rated at 345 horses, in a station wagon.

Why was the Ford Torino discontinued?

In 1968, the Ford Torino debuted to North American customers, and it was a strong competitor in the intermediate car market for several years. When sales lagged, Ford discontinued the Torino in 1976, but Ford Torino parts were readily available for many years afterward.

How much horsepower does a 1970 Ford Torino GT 429 have?

370 horsepower
Under the hood is Ford’s 429 cubic-inch Cobra Jet V8, which made 370 horsepower when new.

What year was the best Ford Torino?

One of the fastest, best-handling muscle cars of 1970
When equipped with the Drag Pack, the Torino Cobra could run the quarter mile in 13.70 seconds at 106 mph, which was not only faster than the more expensive Boss 429 Mustang but faster than most 1970 muscle cars.

How much horsepower does a 72 Torino have?

First issued in 1968, the Torino’s ’72 version was equipped with a two-barrel carburetor that, in conjunction with an 8.5:1 compression ratio, helped muster an able yet mundane 140-hp net.

Was the Ford Torino a muscle car?

This was not the semi-hemi Boss 429 engine, but a fresh design with thin-wall construction and canted-valve heads. Ford retained a familiar moniker for the hottest versions, and built a new muscle car around them: the Torino Cobra.

How much horsepower does a 1970 Torino 429 Cobra jet have?

Under the hood is Ford’s 429 cubic-inch Cobra Jet V8, which made 370 horsepower when new. Sadly, this engine currently generates zero power, as the bare block is on the ground next to the passenger front wheel.

What engine did the Starsky and Hutch Torino have?

Gallery: Starsky And Hutch Gran Torino
Nicknamed the “Striped Tomato,” the original cars had either 400 cubic inch or 351 Windsor V8 engines, depending on the year. It was also rumored that some cars were specially ordered with the 460 cubic inch V8.

What engines were available in the 1970 Torino GT?

In 1970, when Ford launched the massively reworked and aggressively styled Torino, there were five engine displacement options: a 250ci sixer, 302ci and 351ci Windsor, 351ci Cleveland, and the big bad 429ci 385 Series.

What engine was in the Ford Torino?

Torino GT models came standard with a 302 cu in (4.9 L)-2V small block V8 and this was also the base V8 engine optional on other models. Other available engines included a 390 cu in (6.4 L)-2V FE engine, 390 cu in (6.4 L)-4V FE engine and a 427 cu in (7.0 L)-4V FE engine.