What engine was in the 1958 Ford?

The 1958 Ford Fairlane 500 had several engine options. It offered an Inline 6 engine with a displacement of 3654 cc (223.0 cu in) and 145 BHP (106.72 KW) @ 4200 RPM. Additionally, it had several V8 engine options, including:
– 4785 cc (292.0 cu in) V8 with 205 BHP (150.88 KW) @ 4500 RPM
– 5441 cc (332.0 cu in) V8 with 240 BHP (176.64 KW) @ 4600 RPM
– 5441 cc (332.0 cu in) V8 with 265 BHP (195.04 KW) @ 4600 RPM
– 5768 cc (352.0 cu in) V8 with 300 HP (220.8 KW) @ 4600 RPM.
It’s worth noting that the Ford FE-series engines, including the 332 CID (5.4 L) V8, were introduced in 1958 and were known for their serviceability and durability. The Ford Y-block engines, such as the 292 CID V8, were also produced during this time.
Please let me know if there’s anything else I can help you with!

What is the difference between a Ford 360 and 390?

The 360ci engine is a close cousin of the 390 but was available only for pickup trucks through 1976. The 390 has a 4.05-inch bore with a 3.78-inch stroke. The 360 was little more than a 390 block (4.05-inch bore) with a 352 crank (3.50-inch stroke) to achieve 360 cubic inches.

What does H mean in engines?

An H engine is a piston engine comprising two separate flat engines (complete with separate crankshafts), most often geared to a common output shaft. The name “H engine” is due to the engine blocks resembling a letter “H” when viewed from the front.

What is a Ford H-Code 351?

H-code. The H-code 351 Cleveland engines were low performance engines with low compression and two-barrel carburetors. All H-code engines ran on regular grade fuel. Compression ratio was 9.5:1 in 1970 and progressively dropped annually until it reached it low point of 8.0:1 compression in 1973 and 1974.

How many miles per gallon does a 1958 Ford Fairlane get?

Based on data from 1 vehicles, 8 fuel-ups and 541 miles of driving, the 1958 Ford Fairlane gets a combined Avg MPG of 5.46 with a 1.13 MPG margin of error.

What is the H code engine for a 1958 Ford?

Re: 1958 FE engine identification
Your VIN starts with an “H” which indicates the 300 hp 352-4v engine.

Is the Ford 352 a good engine?

If you’re talking about one of the Ford FE engine 352s (made from 1958 to 1976), then yes, it’s a very good engine. as used in the AC Cobra by Carroll Shelby and the Le Mans dominating Ford GT40 .

What transmission is in a 1958 Ford Fairlane?

It comes equipped with an automatic transmission, power brakes, a dual exhaust system, Heidt’s front suspension, power rack and pinion steering, a white power top, and an original AM radio. This Fairlane is riding on a set of chrome wire wheels with the iconic wide white wall tires.

Is a 360 Ford a big block?

Is a 360 Ford a big block? – Quora. Yes it is, although the typical Ford produced ~5-5.8l units were small blocks the FE 360 is actually a standard FE 390 (6.4l) big block engine block using a destroked crank from the 352.

What engine did the 1958 Ford Fairlane have?

This 352 cubic inch engine had a compression ratio of 10.2:1 and was fed by a Carter 4-barrel carburettor. 74 percent of 1958 Fords sold were V-8 powered. Managing that power was done by a standard, three speed manual transmission with steering column-mounted lever.

Was the Ford 360 a good engine?

The FE 360 Big-Block under the hood has never functioned well. It’s a heavy engine, topped off by a bulky, cast-iron intake manifold. It gets worse. In 1973, emissions equipment was in its infancy, and cut out more power than it did emissions.