What engine oil does Subaru recommend?

Subaru’s Recommended Engine Oil
Subaru recommends using synthetic oil for its vehicles, with specific viscosity requirements based on the model and year of the vehicle. Here are the key points to note:
– Synthetic Oil Requirement: If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, Ascent, or BRZ, it is required to use synthetic oil.

– Viscosity Recommendations:
– For the models mentioned above, Subaru recommends using 0W-20 viscosity synthetic oil, designed for improved fuel economy and increased power.
– For the turbocharged engine in the WRX and WRX STI, Subaru recommends using 5W-30 synthetic oil, which is formulated for higher temperatures and provides increased protection against breakdown and superior lubrication for optimal fuel economy.
– Benefits of Synthetic Oil: Subaru synthetic motor oils offer measurably better low and high temperature viscosity performance, better chemical & shear stability, decreased evaporative loss, resistance to oxidation, thermal breakdown, and oil sludge problems, extended drain intervals with the environmental benefit of less oil waste, improved fuel economy in certain engine configurations, better lubrication on cold starts, and longer engine life.
In summary, for most Subaru models, it is recommended to use synthetic oil with specific viscosity grades based on the vehicle’s year and model for optimal performance and longevity of the engine.

Can Subaru use Valvoline oil?

From modern motors to high mileage, Valvoline products are engineered to maximize engine life, providing superior protection for your 2023 SUBARU LEGACY. No wonder America’s original motor oil brand has been trusted for more than 150 years.

Does Subaru use synthetic oil from factory?

Starting in 2011 when Subaru changed from Rubber timing belts to timing chains in the 4 cylinder motors, the factory switched to full synthetic motor oils, 0w/20. The chain driven 6 cylinder motor, still uses 5/30 syntec blend.

Why do Subarus use so much oil?

There are 6 key factors that can cause your Subaru to guzzle oil more quickly which are as follows: Wear to the seals or gaskets will result in oil leaks. Poor oil quality will burn up faster than high quality oil. Worn piston rings will allow oil to escape and be burned inside the combustion chamber.

What oil does Subaru use from factory?

Subaru Oil Guide:

Model	Subaru Oil Required	Capacity
Subaru Legacy & Outback 6 Cyl. 2002 – 2019	5W-30 Conventional Oil	6 – 6.9 Quarts
Subaru Legacy & Outback XT (Turbo) 2020 – 2021	0W-20 Synthetic Oil	4.8 Quarts
Subaru WRX 2002 – 2010	5W-30 Conventional Oil	4.4 – 5 Quarts
Subaru WRX 2011 – 2020	5W-30 Synthetic Oil	4.4 – 5.4 Quarts

What oil brand is recommended for Subaru?

Choose Mobil 1™ motor oil for your Subaru. We offer a full range of synthetic and synthetic blend motor oils to keep your engine in peak condition throughout its lifetime.

Can I use 5W-30 instead of 0W-20 for Subaru Forester?

If you drive a Subaru Forester with a non-turbo engine, it requires 0W-20. If you drive a model with a turbo engine, you’ll need 5W-30.

Do Subarus require special oil?

Naturally aspirated engines in the newest Forester, Impreza, Legacy, Outback, and BRZ models as well as turbocharged models require Subaru Synthetic Motor Oil (or its equivalent).

Can I use Mobil 1 in my Subaru?

Mobil 1 is fine. Also maybe they just use Mobil 1 stickers.

Is Mobil 1 good for Subaru?

One the world’s leading synthetic motor oil brand and mobiles best synthetic offering. With over 40 years of science and research in every bottle Mobil 1 delivers exceptional performance.

Why does Subaru use 0W-20 oil?

What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.