AHG Auto Service » Make » Dodge » What engine is in the original Dodge Power Wagon?

What engine is in the original Dodge Power Wagon?

The original Dodge Power Wagon was equipped with an LA V8 engine.

What engine is in a 1946 Dodge Power Wagon?

Dodge used two different engines in the Power Wagons between the years of 1946 and 1968. The 230ci Flat Head 6 was used from 1946 until 1960 and the 251ci Flat Head 6 was used from 1961 onwards.

What was the top speed of the 1946 Power Wagon?

about 50 mph
Rear axle choice was limited to either a 5.83 or 4.89 final drive ratio — perfect for hauling heavy loads or pulling a plow through the field, but a handicap on the highway, where the top speed was only about 50 mph. The one-ton Power Wagon’s maximum gross vehicle weight rating was 8,700 pounds.

What engine is in a 1977 Dodge Power Wagon?

big block 440 CID V8
This truck is powered by its big block 440 CID V8 with automatic transmission and 4 wheel drive.

How much does a 1947 Power Wagon weight?

8,700-pound
The WDX came in two weight classes, the standard 7,600-pound GVW and the 8,700-pound version. The difference was mostly tires and gearing. The 8,700-pound truck had higher-rated 9.00-16s with 5.83:1 axle ratios, while the lighter truck had 7.50-16s with 4.89:1 ratios.

What engine is in a 1975 Dodge Power Wagon?

History (as Dodge Power Wagon)
The Power Wagon had an enclosed all-weather cab and an 8-foot cargo bed. It had a 126 inch (3,200 mm) up to a 147″ wheelbase chassis. The Power Wagon had a 230 cubic inch flathead inline-six engine. It had a two-speed transfer case.

How much horsepower does a 1946 Power Wagon have?

The engine was rated at 94 horsepower at 3,200 rpm and 185 pound-feet of torque at 1,200 rpm. A single barrel Stromberg carburetor fed fuel into the engine.

What engine is in a 1950 Dodge Power Wagon?

Dodge Power Wagon
Powertrain
Engine 230 cu in (3.8 L) Flathead I6 251 cu in (4.1 L) Flathead I6 318 cu in (5.2 L) LA V8 360 cu in (5.9 L) LA V8
Dimensions
Wheelbase 126 in (3,200 mm)

What engine is in a 1979 Dodge Power Wagon?

The truck is powered by a 5.9 liter (360 cubic inch V8) engine.

What engine came in the 1978 Dodge Power Wagon?

Within an unrestored and original engine bay sits a 318ci V8. It has a 2-barrel carburetor on top, and an NP435 transmission on the back. A Dana 44 front axle, and a 9-3/4 rear axle are noted for the 4×4 drive.

What motor is in 1980 Dodge Power Wagon?

Standard, 3.7-liter (225 CID) Slant Six on W150 115- and 131-inch wheelbase Conventional Cab pickups.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment