The engine options available for the 1970 Ford Torino were as follows:
– 250 cu in (4.1 L) I6 engine
– 302 cu in (4.9 L) Windsor V8 engine
– 351 cu in (5.8 L) Windsor V8 engine
– 351 cu in (5.8 L) Cleveland V8 engine
– 429 cu in (7.0 L) 385 Series V8 engine
These were the standard engine options for the 1970 Ford Torino. It’s worth noting that there were variations and optional engines available as well, such as the Cobra Jet and Super Cobra Jet engines.
Contents
- What was the 0 60 on a 1970 Ford Torino GT?
- What engines were available in the 1970 Torino GT?
- What was the 0 60 on a 1970 Ford Torino 429 Cobra jet?
- How many 1970 Torino GTs were made?
- How fast is the 1970 Ford Torino King Cobra?
- How do you tell if a 429 is a cobra jet?
- How much horsepower does a 1970 Ford Torino king cobra have?
- How much horsepower does a 1970 Ford Torino Cobra 429 have?
- What year was the best Ford Torino?
- How much horsepower does a 1970 Ford Torino Cobra have?
What was the 0 60 on a 1970 Ford Torino GT?
Performance
| 0 – 30 mph | 2.6 s |
|---|---|
| 0 – 60 mph | 6.0 s |
| 1/4 mile | 14.4 s @ 100.2 mph |
| 30 mph – 0 | 8 m (26 ft) |
| 60 mph – 0 | 39 m (128 ft) |
What engines were available in the 1970 Torino GT?
In 1970, when Ford launched the massively reworked and aggressively styled Torino, there were five engine displacement options: a 250ci sixer, 302ci and 351ci Windsor, 351ci Cleveland, and the big bad 429ci 385 Series.
What was the 0 60 on a 1970 Ford Torino 429 Cobra jet?
Motor Trend tested a 1970 Torino Cobra equipped with the Ram Air 370 hp (276 kW), 429 CJ, C-6 automatic and 3.50:1 rear axle, and it went from 0 – 60 mph (97 km/h) in 6.0 seconds while taking 14.5 seconds at 100 mph (161 km/h) to go through the quarter-mile.
How many 1970 Torino GTs were made?
In 1970 there were 56,819 GT Torino hardtops Built but only 3,939 GT Torino convertibles produced. Built in Lorain, OH this is a very rare and highly collectible muscle car.
How fast is the 1970 Ford Torino King Cobra?
200 mph
When it finally came time to test the prototypes at the track in Daytona, the King Cobra easily achieved 200 mph . . . but there was a problem. The front end of the car was reported to make too much downforce, and the lack of spoiler resulted in rear-end lift in high-speed turns.
How do you tell if a 429 is a cobra jet?
If you see a “4U” or “4UA” marking, you’ve found a 429 crank with 3.590-inch stroke. If you see “2Y” or “3Y,” you’ve found a 460 crank with a 3.850-inch stroke. A 429 Cobra Jet or Super Cobra Jet crank will have a Brinell hardness-tested dimple mark in the first counterweight.
How much horsepower does a 1970 Ford Torino king cobra have?
The first was the 429 Thunder Jet, the standard engine for the Cobra, rated at 360 hp (270 kW).
How much horsepower does a 1970 Ford Torino Cobra 429 have?
370 horsepower
Under the hood is Ford’s 429 cubic-inch Cobra Jet V8, which made 370 horsepower when new.
What year was the best Ford Torino?
One of the fastest, best-handling muscle cars of 1970
When equipped with the Drag Pack, the Torino Cobra could run the quarter mile in 13.70 seconds at 106 mph, which was not only faster than the more expensive Boss 429 Mustang but faster than most 1970 muscle cars.
How much horsepower does a 1970 Ford Torino Cobra have?
370 hp
Engine: 429 ci/370 hp SCJ.
