Engine of a 1989 Acura Integra
The 1989 Acura Integra is equipped with a DOHC, 4-cylinder, 16-valve engine. It has a horsepower of 118 hp @ 6500 rpm and a torque of 103 lbs.-ft. @5500 rpm (14.2 Kg-m). The engine displacement is 1590cc/97cu. in. and it features a compression ratio of 9.3:1. The fuel supply system is computer-controlled, programmed fuel injection and the ignition system is fully transistorized. The engine block and cylinder head are made of aluminum alloy. The emission control system includes a 3-way catalyst and the recommended fuel is unleaded regular.
The information provided in the search results indicates that the 1989 Acura Integra is equipped with a DOHC engine, which aligns with the specifications of the engine mentioned in the search results.
Contents
- What engines do Acura Integra have?
- Is Integra a VTEC?
- Which Integra has a B18?
- How do I know if I have a K20 or K24?
- What engine is in a 1989 Acura Integra?
- What is a B18B1 engine?
- What cars have K20 engine?
- How much horsepower does a 1989 Integra have?
- Did the Integra have a k20?
- What motor is in a 1990 Acura Integra?
What engines do Acura Integra have?
Engine, Transmission, and Performance
The Integra is powered by a 200-hp turbocharged 1.5-liter four-cylinder engine borrowed from the Honda Civic Si.
Is Integra a VTEC?
Integra Powertrains
With a 1.5L VTEC® Turbo engine that pumps out 200-HP * and an early and flat torque curve that offers smooth power delivery, the Integra is a powerful and agile tour de force. The 2.0L VTEC® Turbo makes the Integra Type S the most powerful Integra yet.
Which Integra has a B18?
The first B18 engine seen stateside was the B18A1 in the 1990–1993 Acura Integra RS/LS/GS. It was a non-VTEC 1.8L motor that put out 130 hp from 1990–1991, while the 1992–1993 version had a slight increase to 140 hp.
How do I know if I have a K20 or K24?
Similar to B series, the K-series car engines have two short blocks with the same design; the only difference between them being the deck height. K20 uses the short block with a deck height of 212 mm (8.3 in) where K23 and K24 block has a deck height of 231.5 mm (9.1 in).
What engine is in a 1989 Acura Integra?
This 1989 LS is a great example of a first-gen Integra. It has a 1.6-liter DOHC four-cylinder good for 118 horsepower at 6500 rpm, a five-speed manual transmission, and a lovely two-tone interior with well-bolstered seats. The sharply folded sheetmetal still looks good today, and you gotta love the popup headlights.
What is a B18B1 engine?
The B18B1 became a popular engine swap candidate, often referred as an “LS swap” among Honda enthusiasts. The 1.8L made 142 hp and 127 ft-lbs of torque, but also became a donor for the LS/VTEC swap that became popular later on.
What cars have K20 engine?
K20 Engine – Which Cars Have It?
- 2001–2006 Honda Civic Type R (JDM)
- 2001–2006 Honda Integra Type R (JDM)
- 2002–2008 Honda Accord Euro R (JDM)
- 2007–2011 Honda Civic Type R (JDM)
- 2001–2006 Honda Stream.
- 2001–2006 Honda Civic Type R (EDM)
- 2002–2004 Acura RSX Type S.
- 2002–2004 Honda Integra Type R (AUDM/NZDM)
How much horsepower does a 1989 Integra have?
ACURA Integra Coupe 1.8L 5MT (140 HP)
| ENGINE SPECS – 1.8L 5MT (140 HP) | |
|---|---|
| Power: | 103 KW @ 6000 RPM 140 HP @ 6000 RPM 138 BHP @ 6000 RPM |
| Torque: | 126 lb-ft @ 5000 RPM 171 Nm @ 5000 RPM |
| Fuel System: | Electronic Fuel Injection |
| Fuel: | Gasoline |
Did the Integra have a k20?
The JDM Type R had reduced weight, a 2.0L DOHC i-VTEC 4-cylinder K20A engine that output 217 hp (164 kw) (Japan-only; Oceania models use an engine similar to the RSX Type-S), 6-speed close-ratio manual transmission, as well as a helical limited-slip differential (LSD), stiffer springs and shocks, high intensity …
What motor is in a 1990 Acura Integra?
It is a 4-cylinder. dual overhead cam. 16-valve engine with a displacement of 1.8 liters.
