The 1958 Ford Fairlane 500 had the following engine options:
– Inline 6 (3654 cc | 223.0 cu in. | 3.7 L.) with 145 BHP (106.72 KW) @ 4200 RPM.
The 1958 Ford Fairlane 500 also introduced new big-block FE V8 engines of 332 and 352 CID (5.4 L and 5.8 L) as replacements for the previous largest V8s ).
I hope this information helps! Let me know if you have any other questions.
Contents
- How many 1958 Ford Fairlanes were made?
- What is the H code engine for a 1958 Ford?
- What is considered high mileage on a Ford?
- What transmission is in a 1958 Ford Fairlane?
- How many miles per gallon does a 1958 Ford Fairlane get?
- What motor came in a 1958 Ford Fairlane?
- What is a Ford H-Code 351?
- What engines were available in the 1959 Ford Fairlane?
- How long does the average Ford engine last?
- What is an H 6 engine?
How many 1958 Ford Fairlanes were made?
Total series output was 118,140 units including both Fairlane sixes and V-8s. Total series output was 306,429 units including both Fairlane 500 sixes and V-8s. Production was counted by body style only. 57,490 Total.
What is the H code engine for a 1958 Ford?
Re: 1958 FE engine identification
Your VIN starts with an “H” which indicates the 300 hp 352-4v engine.
What is considered high mileage on a Ford?
Typically, a diesel truck with more than 200,000 miles on the odometer may be considered high mileage.
What transmission is in a 1958 Ford Fairlane?
It comes equipped with an automatic transmission, power brakes, a dual exhaust system, Heidt’s front suspension, power rack and pinion steering, a white power top, and an original AM radio. This Fairlane is riding on a set of chrome wire wheels with the iconic wide white wall tires.
How many miles per gallon does a 1958 Ford Fairlane get?
Based on data from 1 vehicles, 8 fuel-ups and 541 miles of driving, the 1958 Ford Fairlane gets a combined Avg MPG of 5.46 with a 1.13 MPG margin of error.
What motor came in a 1958 Ford Fairlane?
Second generation (1957–1959)
| Second generation | |
|---|---|
| Chassis | body-on-frame |
| Powertrain | |
| Engine | 223 cu in (3.7 L) Mileage Maker I6 292 cu in (4.8 L) Thunderbird V8 312 cu in (5.1 L) Thunderbird V8 (1957) 332 cu in (5.4 L) Interceptor V8 (1958–1959) 352 cu in (5.8 L) Interceptor V8 (1958–1959) |
What is a Ford H-Code 351?
H-code. The H-code 351 Cleveland engines were low performance engines with low compression and two-barrel carburetors. All H-code engines ran on regular grade fuel. Compression ratio was 9.5:1 in 1970 and progressively dropped annually until it reached it low point of 8.0:1 compression in 1973 and 1974.
What engines were available in the 1959 Ford Fairlane?
As in 1958, all full-size ’59 Fords except the Skyliner were offered with Ford’s standard 223-cid six-cylinder engine. “Thunderbird” V8s of up to 352-cid were again available. Excepting the occasional Skyliner, the distinctive but rust-prone 1958 Fairlanes are uncommon today. The ’59s have seemingly fared better.
How long does the average Ford engine last?
roughly 200,000 miles
Gasoline engines come in all shapes and sizes, whether you purchase an SUV for sale or a pickup truck, you can expect these engines to last a long time. Ford engines, on average, will last 15 years in roughly 200,000 miles. This is an excellent range when you want to buy a used vehicle.
What is an H 6 engine?
Subaru has marketed its flat-four and flat-six engines as “H4” and “H6” respectively. The letter “H” in this case refers to “horizontally-opposed”, an alternative term for flat engines; these engines can also be said to look like a “H” or conjoined “H”s, albeit from the top and in schematic form.
