Engine in the 1960 Ford Galaxie
The 1960 Ford Galaxie had the following engine options:
– Inline 6: 3654 cc | 223.0 cu in. | 3.7 L with 145 BHP (106.72 KW) @ 4000 RPM
– V8: 4785 cc | 292.0 cu in. | 4.8 L with 185 BHP (136.16 KW) @ 4200 RPM.
So, the 1960 Ford Galaxie was available with both an Inline 6 and a V8 engine.
If you need further information or have any other questions, feel free to ask!
Contents
- How many 1963 Galaxie 427 were made?
- What is the rarest Ford Galaxie?
- What is the rarest Ford engine?
- Did Ford have a 406 engine?
- What is the difference between a Ford Galaxie and a Ford Galaxie 500?
- Is a Ford Galaxie a muscle car?
- What engine did the Ford Galaxie 500 have?
- What is an R code Galaxie?
- What size engine is in a 1963 Ford Galaxie 500?
- What engines were available in the 1960 Ford Galaxie?
How many 1963 Galaxie 427 were made?
3,857
According to the Galaxie Club of America this is one of only, 3,857 R-Code 427 Sports Hardtops produced, and the 427 Galaxie Registry states that less than 200 exist today.
What is the rarest Ford Galaxie?
Lot #425 – The first year Galaxie 500, 1962, is the most rare and elusive of all Galaxies. Even more rare, this car is equipped with its original 390ci Z-code high-performance 4-barrel engine with original factory cast-iron headers and ultra-rare FoMoCo aluminum intake manifold.
What is the rarest Ford engine?
The Ford 427 SOHC Cammer V8 is one of the rarest and most desirable big block V8 engines ever made. Unusually for an American V8 it has overhead cams rather than pushrods as it was built specifically for racing.
Did Ford have a 406 engine?
For 1962, Ford launched its 406-cubic-inch V-8 as a racing homologation special; it used the 390’s 3.785-inch stroke, but bored things out . 080, to 4.13 inches. Two versions were available: the four-barrel version offering 385 horsepower, and the tri-power variant was rated at 405 horsepower.
What is the difference between a Ford Galaxie and a Ford Galaxie 500?
Technically speaking, the Ford Galaxie became the Galaxie 500 only when it started carrying a new Ford engine. This mill offered one of the biggest displacements of the time, the 7.0-liter “Thunderbird” V8, and came with a 345 horsepower rating. While the engine was introduced in 1966, it carried on for 1967 as well.
Is a Ford Galaxie a muscle car?
The 1964 Ford Galaxie with the 427CI/425HP engine and 4 speed manual transmission options could be considered a muscle car. But most Galaxies came equipped with a much more modest drivetrain.
What engine did the Ford Galaxie 500 have?
The 223 cu in (3.7 L) “Mileage Maker” 6-cylinder was the base engine. The 292 cu in (4.8 L) V8 was standard on the 500/XL. The XL had sportier trim inside and out.
What is an R code Galaxie?
The R-Code Galaxie Lightweights
Manufacturers stuffed the largest-possible engines into their full-sized two-door models to create true performance versions. To meet FIA and NASCAR displacement rules, these immensely powerful motors were limited to seven liters, or just over 427 cubic inches.
What size engine is in a 1963 Ford Galaxie 500?
The Galaxie 500XL came with a standard F-build code 260-cu.in. V-8, which used a 3.80 x 2.87-inch bore and stroke, 8.7 compression and a 2-bbl., 270 cfm Holley carburetor to make 164hp at 4,400 rpm and 258-lbs. ft. of torque at 2,200 rpm.
What engines were available in the 1960 Ford Galaxie?
Engines offered for 1960 were the 223 cubic inch six and 292 & 352 V8s. A midyear introduction was the Hipo 352CI with 360 HP. This was Ford’s first engine with over 1HP per cubic inch displacement.
