Understanding “Service Tire Pressure System” on Dodge Journey
The message “Service Tire Pressure System” on a Dodge Journey typically indicates an issue with the Tire Pressure Monitoring System (TPMS). This system is designed to monitor the air pressure in the tires and alert the driver if there is a significant loss of pressure or if the system itself is not functioning properly.
TPMS Functionality:
The Dodge Journey uses a direct TPMS system, which means TPMS sensors are installed in the wheel. If one or more tires indicate low tire pressure, the TPMS sensors will transfer the information to the vehicle’s ECU. An indicator light or each tire pressure will show on the dash. When a sensor is replaced for one or more wheels of a Dodge Journey, a TPMS relearn is recommended to transfer the new TPMS sensor IDs to the vehicle’s ECU.
Significance of the Message:
When the “Service Tire Pressure System” message appears, it is a notification to warn the driver of significantly low air pressure or high-pressure loss in the tires. Ignoring low pressure can affect the vehicle’s overall performance, including how the vehicle drives, increased fuel consumption, and the risk of tire failure.
Resetting the System:
If the TPMS in the Dodge Journey is not working properly, it may be necessary to reset the system. This can be done to re-initialize the TPMS and address any issues with low air pressure or system malfunction.
Potential Issues:
The “Service Tire Pressure System” message may indicate various issues, such as a malfunctioning sensor or a significant loss of air pressure in one or more tires. It’s important to address this message promptly to ensure the proper functioning of the TPMS and the safety of the vehicle.
In summary, the “Service Tire Pressure System” message on a Dodge Journey is a warning related to the Tire Pressure Monitoring System, indicating potential issues with tire pressure or the system itself. It’s important to address this message promptly to ensure the proper functioning of the TPMS and the safety of the vehicle.
Contents
- How much does it cost to service tire pressure system?
- Why does it say service tire pressure system?
- How do you reset the service tire pressure system?
- How do I tell which tire pressure sensor is bad?
- Where is the TPMS button located?
- Is it bad to drive with your service tire monitor system light on?
- How do I manually reset my TPMS sensor?
- Where is the TPMS reset button on a Dodge Journey?
- Why does my car say low tire pressure but tires are fine?
- How do you fix a service tire monitor system?
How much does it cost to service tire pressure system?
The cost of replacing a TPMS (Tire Pressure Monitoring System) sensor can vary greatly depending on the type of vehicle, brand and type of sensor, location of replacement, and labor cost. The average cost can range from $50 to $200 per tire, with the average cost being around $100 to $150 per tire.
Why does it say service tire pressure system?
When this warning message appears on your vehicle’s dashboard, it suggests that there may be a malfunction or fault within the TPMS itself or that one or more of the tire pressure sensors aren’t functioning properly. This usually means it’s time for a service appointment to see why the system needs service.
How do you reset the service tire pressure system?
With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh.
How do I tell which tire pressure sensor is bad?
Measure the air pressure of each tire and record them. Then, compare the data with the one displayed in your car display panel. If the reading in one tire is different from the one displayed, it might mean that there’s a problem with the TPMS sensor in that tire.
Locate the TPMS reset button. It is typically located beneath the steering wheel, near the driver’s sidekick panel, or on the dashboard. Once you’ve found the TPMS reset button, press and hold it for approximately three seconds. You may need a pen or a similar tool to reach it.
Is it bad to drive with your service tire monitor system light on?
If the light has just turned on and you need to find your way to our shop or to an air pump, you should be fine. However, continuing to drive your car with the light on is not safe. Here’s why! When you drive your vehicle with low tire pressure, you are causing your tire to wear down excessively and prematurely.
How do I manually reset my TPMS sensor?
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
The TPMS reset button is usually located beneath the steering wheel. If you can’t locate it, check your owner’s manual.
Why does my car say low tire pressure but tires are fine?
TPMS malfunction: If the TPMS itself is malfunctioning, the light may come on even if your tire pressure is normal. If you see the tire pressure light and your tires seem properly inflated, it’s a good idea to have the TPMS checked by a mechanic.
How do you fix a service tire monitor system?
What Should I Do When The Light Is On?
- Check the tire pressure. If the pressure isn’t proper, you should quickly inflate the tire.
- Check the sensors themselves for cracks or other damage. If damaged, they need to be replaced before driving on them again.
- Call a mechanic if neither of those solutions works.
