What does check TPM system mean on a Dodge Avenger?

Understanding “Check TPM System” on a Dodge Avenger
The “Check TPM System” message on a Dodge Avenger refers to the Tire Pressure Monitoring System (TPMS) alerting the driver to an issue with the tire pressure. The TPMS is designed to monitor the air pressure in the tires and alert the driver if the pressure is significantly low or high. When the system detects a problem, it triggers the “Check TPM System” message to prompt the driver to investigate the issue.
Function of the TPMS
The TPMS in the Dodge Avenger uses sensors located in the wheel wells to monitor the tire pressure. These sensors communicate with the Wireless Control Module (WCM), also known as the Sentry Key Remote Entry Module (SKREEM), to provide information about the tire pressure to the vehicle’s system.
Possible Causes of the Message
The “Check TPM System” message can be triggered by various issues, including:
– Incorrect sensor readings after switching wheels, which may require a reset using a “Chrysler Star Scan” unit.
– Low tire pressure due to factors such as cold temperatures or punctures.
– Faulty TPM valves or sensors, which may need to be replaced.
Resolving the Issue
To address the “Check TPM System” message, drivers can take several steps:
– Resetting the TPMS: This involves pressing the TPMS reset button and holding it until the light blinks three times, then driving the vehicle for 20 minutes to reset the sensor.
– Replacing Faulty Sensors: If the issue persists, it may be necessary to replace the TPM valves or sensors to ensure accurate tire pressure monitoring.
– Professional Assistance: In some cases, resolving the “Check TPM System” message may require the expertise of a dealership or service center, especially if specialized tools like the “Chrysler Star Scan” unit are needed.
In summary, the “Check TPM System” message on a Dodge Avenger indicates a potential issue with the tire pressure monitoring system, and it’s important for drivers to investigate and address the underlying cause to ensure the safety and performance of their vehicle.

How do I reset my TPM on my car?

Between 30 and 60 miles per hour but not all at.

What causes TPM malfunction?

The issue occurs if a computer has been reimaged without clearing the TPM. Attempt to resolve the issue by clearing the TPM and installing the latest TPM firmware (following the steps in the section above). Check the BIOS to ensure that the TPM settings are correct.

Is it OK to drive with TPMS light on?

As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.

Where is TPMS reset button?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

How much does it cost to fix a TPM sensor?

On average, replacing a TPMS sensor can range from $50 to $200 per tire, with the average cost being around $100 to $150 per tire.

How do you fix a TPM malfunction?

Thankfully, there are quite a few ways you can fix the TPM malfunctioning error.

1. Perform a Clean Boot.
2. Prepare TPM.
3. Modify the TPM 2.0 Driver—Error Code: 80090016.
4. Clear Your Trusted Platform Module (TPM)
5. Disable Modern Authentication—Microsoft Office.
6. Take Ownership of the Ngc Folder and Delete It.

Where is the TPM reset button?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

What is TPM system on a Dodge Avenger?

The tire pressure monitoring light located in the instrument cluster will turn on and an audible chime will sound if the pressure is low in one or more of your tires. Once the light is illuminated.

What does it mean when it says check TPM system?

WHAT IT MEANS & WHAT YOU NEED TO DO. The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.

Why is my TPMS light on but tires are fine?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.