What does “Check Coolant Additive” mean on a Ford F250?
The “Check Coolant Additive” message on a Ford F250 is a reminder to check the coolant level in the vehicle. It is not a warning or fault message, but rather a reminder to ensure that the coolant is at the appropriate level and that the coolant additive is still effective.
The coolant additive is a chemical that is added to the coolant to help maintain its effectiveness and protect the engine from corrosion and cavitation. Over time, the coolant additive can become depleted, which can reduce its ability to protect the engine. Therefore, it is important to regularly check the coolant additive level and add more if necessary.
To address the “Check Coolant Additive” message on a Ford F250, you can follow these steps:
1. Check the coolant level: Lift the hood of your vehicle and locate the coolant reservoir. Ensure that the coolant level is between the minimum and maximum marks on the reservoir. If the level is low, you can add a mixture of coolant and water to bring it up to the appropriate level.
2. Check the coolant additive level: If your vehicle is equipped with a coolant additive reservoir, check the level of the additive. The coolant additive reservoir is typically located near the coolant reservoir. If the coolant additive level is low, you can add the appropriate coolant additive recommended by Ford.
3. Reset the message: After checking and adjusting the coolant and coolant additive levels, you can reset the “Check Coolant Additive” message on the dashboard. Press and hold the OK button on the dashboard until the message disappears.
It is worth noting that if you are unsure about the process or want to ensure that the coolant additive is properly checked, you can visit a Ford dealer or a qualified mechanic who can perform a chemical test on the coolant to ensure it is properly blended for your vehicle.
Remember, maintaining the proper coolant level and ensuring the effectiveness of the coolant additive is important for the overall health and performance of your Ford F250’s engine.
Contents
- How long does coolant additive last?
- Should you use coolant additive?
- How much coolant additive for 6.7 Powerstroke?
- Why does my f250 says check coolant additive?
- What is supplemental coolant additive?
- How does coolant additive work?
- What is the coolant additive?
- What does diesel coolant additive do?
- Is coolant additive the same as antifreeze?
- What kind of coolant does a Ford f250 diesel take?
How long does coolant additive last?
Delivers fast and consistent protection with inorganic chemicals, typically lasts 2 years or 30,000 miles. These additives use an organic acid as the primary corrosion inhibitor and heavily depend on various inorganic supplements such as silicate, nitrate, phosphate, and molybdate.
Should you use coolant additive?
They’re also pretty much essential in any engine which contains aluminium which will corrode at an alarming rate if you do not use them. Yes, they do help clean the system. Actually, they allow your coolant to work at higher temperatures than water alone before boiling.
How much coolant additive for 6.7 Powerstroke?
Capacities and Specifications – 6.7L Diesel
| Item | Capacity |
|---|---|
| Engine coolant (secondary cooling system) | 15.1 qt (14.3 L)1 |
| Engine coolant additive (secondary cooling system) | 16.0 fl oz (473 ml)2 |
| Brake fluid | Between MIN and MAX on brake fluid reservoir |
| Front axle | 2.7 qt (2.6 L) |
Why does my f250 says check coolant additive?
The Check Coolant Additive Light comes on every 600 hours to remind you to check the coolant levels. While this does not indicate a problem, it does mean you should bring your Super Duty in to a certified Ford Service Center for a Coolant Check. DO NOT just add more coolant to the system!
What is supplemental coolant additive?
SCAs, or supplemental coolant additives, are formulations added to the coolant stream to provide, as the name suggests, supplemental anti-corrosion and cavitation (or liner pitting) protection. Liner pitting is a significant problem in heavy-duty vehicles like the ones previously mentioned.
How does coolant additive work?
Not saying it’s ever happened to you this is called radiator relief this is what we needed or I needed in that case high performance coolant additive reduce coolant temperatures up to 30 degrees. And
What is the coolant additive?
Coolant additives use chemicals called surfactants. When water is agitated or heated, surface tension holds bubbles together before they burst. Since bubbles are filled with air, they reduce the water’s heat-transfer ability. Imagine thousands of bubbles in the coolant passages of your engine as it runs.
What does diesel coolant additive do?
Once additives deplete, however, all kinds of problems can arise, like cylinder-liner cavitation, corrosion and formation of scale, which reduces heat-transfer and can lead to engine overheating. Supplemental diesel coolant additives replenish the additives that have depleted to ensure your engine is still protected.
Is coolant additive the same as antifreeze?
Coolant is a fluid used in the radiator to remove the engine’s heat. Antifreeze is an additive mixed with water or coolant to prevent your car engine from freezing in cold weather. The ratio of water or coolant to antifreeze should be 50:50.
What kind of coolant does a Ford f250 diesel take?
Peak – Original Equipment North American Orange Antifreeze and Coolant: 50/50 Ready To Use, 1 Gallon (Part No. NAOB53)
