What does a Ford Fusion take for oil?

Oil Type for Ford Fusion
The recommended engine oil for a Ford Fusion depends on the model year and engine specifications. It is important to consider the type of oil (mineral, synthetic, or semi-synthetic) and its viscosity. Here are some key points to consider:
– Oil Viscosity: The viscosity of the oil is crucial. The recommended viscosities for Ford Fusion engines include 5W-20, 0W-20, and 5W-30.
– Oil Change Frequency: An oil change is generally recommended every 10,000 to 30,000 miles or every two years, as specified in the maintenance guide for your Ford Fusion.
– Oil Capacity: The 1.5L 4-cylinder engine can hold up to 4.2 quarts, and the 2L 4-cylinder engine holds up to 5.7 quarts of oil.
It’s important to note that Ford recommends using fully synthetic motor oil for the Fusion, irrespective of the model and type, and suggests using an oil with SAE 5W-20 viscosity levels, although SAE 5W-30 is also acceptable. Additionally, it’s recommended to purchase oils from reputable brands, such as Motorcraft, for best results.
Considering these factors, it’s advisable to refer to the maintenance guide for your specific Ford Fusion model and year to determine the most suitable engine oil type and capacity.
If you have any further questions or need additional information, feel free to ask!

What kind of oil does a 2014 Ford Fusion take?

5W-20
Notes: Full synthetic. 5W-20.

Can I switch back to regular oil after using synthetic?

Myth: Once you switch to synthetic oil, you can never switch back. This is one of the most persistent myths about synthetic oil—and completely untrue. You can switch back and forth at any time. In fact, synthetic blends are simply a mixture of synthetic and conventional oils.

What kind of oil does a 2015 Ford Fusion take?

STP Conventional Engine Oil 5W-20 1 Quart
Notes: Conventional. 5W-20.

Can a Ford Fusion take full synthetic oil?

Ford strongly recommends using full-synthetic oil for your vehicle for optimal performance.

Can I use 5W30 instead of 5W20 in my Ford Fusion?

5W20 is the recommended, early on, they found that 10W30 would cause the relief to blow off and blow out the oil filter, but I believe they had that rectified by your cars year. Roller cams like the lighter weight oils, but with age, it doesn’t hurt to step up to 5W30, particularly in the hotter regions in the country.

What happens if you put regular oil instead of synthetic?

Synthetic oils typically provide better protection than conventional oils, but switching back and forth between full synthetic and conventional oil will not damage the engine. Of course, this depends on the current engine condition and the quality of the conventional oil being used.

What kind of oil does my 2016 Ford Fusion take?

Oil Grade: SEO18

Viscosity:	All TEMPS….5W-20
Capacity:	With filter 5.7 quarts. After refill check oil level.
Torque:	Oil Drain Plug…21 ft/lbs

Should I use synthetic oil in my Ford Fusion?

If you tend to drive aggressively, idle your engine for a long time, or you drive in stop-and-go traffic often, you may want to think about choosing synthetic engine oil. It offers excellent protection in severe conditions and may prevent undue wear over the years.

Can I use 5w30 instead of 5W20 in my Ford Fusion?

5W20 is the recommended, early on, they found that 10W30 would cause the relief to blow off and blow out the oil filter, but I believe they had that rectified by your cars year. Roller cams like the lighter weight oils, but with age, it doesn’t hurt to step up to 5W30, particularly in the hotter regions in the country.

What happens if you put synthetic oil instead of full synthetic?

For most vehicles, synthetic blend is a good choice. If your vehicle speficies that full synthetic is required, then a synthetic blend will not be okay – it could actually leave your engine vulnerable to damage.