What do I need for oil change Subaru Crosstrek?

To perform an oil change on a Subaru Crosstrek, you will need the following:
1. Motor Oil: The recommended oil type for a Subaru Crosstrek may vary depending on factors such as the engine type, climate, and driving habits. It is best to consult the owner’s manual or contact a Subaru dealership for the specific oil type and viscosity recommended for your Crosstrek.
2. Oil Filter: You will need to replace the oil filter during an oil change. It is recommended to use a genuine Subaru oil filter for optimal performance and to maintain the warranty.
3. Oil Drain Pan: An oil drain pan is necessary to catch the old oil when draining it from the engine.
4. Oil Filter Wrench: An oil filter wrench may be required to remove the old oil filter.
5. Funnel: A funnel can help you pour the new oil into the engine without spilling.
6. Ratchet and Socket Set: You may need a ratchet and socket set to remove the oil drain plug.
7. Oil Filter Removal Tool: In some cases, an oil filter removal tool may be needed to loosen and remove the old oil filter.
8. Shop Towels: Shop towels or rags can be used to clean up any spills or wipe off any excess oil.
Remember to always follow the instructions provided in the owner’s manual or consult a professional if you are unsure about any step of the oil change process.

What kind of oil do I need for my Subaru Crosstrek?

0W-20 synthetic oil
The right Subaru Crosstrek oil type! The recommended Subaru Crosstrek oil type for the most recent generation is 0W-20 synthetic oil.

Can I use 5W 20 instead of 0W-20?

Simply put, no. Some engine manufactures will say that 5w20 can be installed but 0w20 is preferred, especially if the engine was manufactured before the most recent change in API standards. But most newer engines were designed with tolerances designed specifically with 0w20 being installed.

Does Subaru crosstrek require synthetic oil?

Subaru provides specific guidelines for the type of oil that should be used in their vehicles, including the Crosstrek. Typically, Subaru recommends using synthetic oil with a viscosity rating of 0W-20 for most Crosstrek models.

Can you change your own oil on a Subaru?

Unlike other car maintenance tasks, changing your engine oil is something you can do on your own. If you are new to this process, it can take around an hour but subsequently, you should be able to manage in half an hour.

Can I put 5w30 instead of 0w20 Subaru?

Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change.

How long can Crosstrek go without oil change?

The general rule for Subaru vehicles is to get an oil change every 6,000 miles and every six months, whichever comes first. With that said, don’t go more than six months without getting an oil change, no matter how much or how little you drive.

Is 6000 miles without an oil change bad?

Today, most manufacturers recommend oil changes between 5,000 and 10,000 miles — sometimes more with synthetic motor oils. Some manufacturers may list a time interval, as well, which can be six months or a year.

Does Subaru require synthetic oil?

Subaru Synthetic Motor Oil.
If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.

How many miles can you get on a synthetic oil crosstrek?

7,500 – 10,000 miles
Synthetic oil usually should be changed every 7,500 – 10,000 miles. Keep in mind it’s best to check your owner’s manual and with your dealer to find out the intervals that work best for your vehicle. Mike Shaw Subaru offers a variety of oil changes options to keep your 2021 Subaru Crosstrek running strong.

Do Subarus need special oil changes?

No. Subaru Synthetic Motor Oil works with the same Subaru filters used with conventional motor oils.