The 2004 Dodge Dakota is equipped with a 9.25-inch rear differential. The specific configuration of the differential depends on the stock configuration of the vehicle. It can come with either a 3.55 or 3.92 gear ratio, and it can have either a limited slip differential or an open differential.
Please note that the information provided is based on the search results and may not cover all possible configurations or variations. It is always recommended to consult the owner’s manual or contact a certified Dodge dealership for the most accurate and up-to-date information regarding your specific vehicle.
Contents
- How do I know what differential my Dodge has?
- How do you tell if you have a Dana 70?
- What Dodge rear end do I have?
- What is the gear ratio on a 2004 Dodge Dakota rear end?
- What is the rear end ratio of a 2003 Dodge Dakota?
- What type of differential does my truck have?
- How do I know if I have a 8.8 or 9.75 rear end?
- What is the difference between 4.7 and 3.73 axles?
- What vehicles have Dana 60 front axles?
- How do I know what diff is in my car?
How do I know what differential my Dodge has?
If the ID tag or stamp is missing or unreadable, differentials can be identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter. They can also be identified by whether the center section is an integral or dropout design.
How do you tell if you have a Dana 70?
if you find a 6 digit (plus a dash number) number, like 605386–3 – either stamped on axle tube or on a tag under the differential cover bolts – that starts with 603 or 605, it is a Dana 70.
What Dodge rear end do I have?
The Axle Ratio is stamped on a Gear Ratio Tag on the axle cover. The stamped numbers on the left or right axle tube can also identify the axle. Chrysler Dodge differential gasket patterns can help you indentiy what rear end you have.
What is the gear ratio on a 2004 Dodge Dakota rear end?
We were able to check it out on the vin decoder and determined it is an 8.25 with 3.55 ratio.
What is the rear end ratio of a 2003 Dodge Dakota?
This rear diff is configured with a 3.55 or 3.92 gear ratios, and a Limited Slip differential, depending on the stock configuration of your Dodge Dakota.
What type of differential does my truck have?
The easiest way to tell if you have an open differential is to jack up the car and spin one of the rear tires. If the other wheel spins in the opposite direction, you have an open differential. If it spins in the same direction, you have a limited slip differential, or LSD.
How do I know if I have a 8.8 or 9.75 rear end?
On the passenger’s side upper and lower corners, there’s two semi-circular divots that can easily be seen when looking at the cover from straight on. While the Super 8.8’s cover has a bulge for the ring gear, it’s not anywhere near as pronounced as the 9.75’s.
What is the difference between 4.7 and 3.73 axles?
Your engine is going bang more often with 4.7 than with 3.73 for any given speed. So, unless that additional torque is necessary to move something, the vehicle, with or without a trailer, etc. you are turning and burning more fuel for a given speed.
What vehicles have Dana 60 front axles?
The Dana/Spicer Model 60 is an automotive axle manufactured by Dana Holding Corporation and used in OEM pickup and limited passenger car applications by Chevrolet, Dodge, Chrysler, Jeep, Ford and Land Rover.
How do I know what diff is in my car?
How do you tell if your car has an open or limited slip rear differential? Jack it up and manually rotate a driven wheel. If it has an open diff, the other wheel will spin the other way, whereas with a limited slip diff both wheels will rotate in the same direction.
