AHG Auto Service » Make » Subaru » What causes Subaru bearing failure?

What causes Subaru bearing failure?

Causes of Subaru Bearing Failure
Subaru bearing failure can be caused by several factors, leading to potential safety and driving comfort issues. Some common causes and symptoms of Subaru bearing failure include:
1. High Radial and Axial Forces: Wheel bearings in Subaru Outback are crucial components that allow the wheels to turn easily and absorb high radial and axial forces. Driving with a defective wheel bearing can be dangerous, and excessive play in the wheel bearing can indicate a likely defect.
2. Rod Bearing Failure: Rod bearing failure is common with Subaru motors, particularly with the newer FA series. Even mild upgrades may require a built motor to prevent bearing failure. Proper build quality and clearances during the build process are crucial in preventing bearing failure.
3. Metal Contamination: A major issue with bearing failure is the metal contamination that gets sent through the engine. During the rebuilding process, thorough inspection and cleaning of all parts that are part of the oiling system are essential. It is recommended to replace parts that are difficult to clean properly rather than attempting to clean them.
4. Driving Conditions: Frequently driving through mud, water, or road salt can contribute to wheel bearing failure. Wheel bearings need to be tight to keep away debris, water, and dust, and they support the entire vehicle’s weight during operation, leading to significant wear and tear.
5. Lack of Lubrication: Wheel bearings are different from engine bearings in that there is no constant source of lubrication. This means that wheel bearings need to be tight to keep away debris, water, and dust. Lack of proper lubrication can lead to premature failure.
Conclusion
Subaru bearing failure can be caused by a combination of factors, including high radial and axial forces, rod bearing failure, metal contamination, driving conditions, and lack of lubrication. It’s important to address any symptoms of bearing failure promptly to ensure safety and driving comfort.

How much does it cost to fix a wheel bearing on a Subaru?

about $350
What’s the cost for wheel bearing replacement on my Subaru. For a national average across all vehicles, the average cost to replace the wheel bearings (for 1 wheel) is about $350 (including parts and labor).

How do I know if my Subaru wheel bearings are bad?

So when you’re checking your wheel bearing the obvious thing to do first is Shake It. It feels nice and tight now I’ll spin. It. I do not hear nothing like I said earlier it sounded to me like it was

What are the five cause of bearing failure?

10 Common Causes of Bearing Failure

  • Lubrication Failure. If your bearings have failed, there’s a good chance it’s due to improper lubrication.
  • Contamination.
  • Misalignment.
  • Improper Mounting.
  • Corrosion.
  • False Brinelling.
  • Fluting (Electrical Damage)
  • Spalling (Fatigue)

How long do wheel bearings last on a Subaru?

How long does a wheel bearing last? Wheel bearings have an average lifespan of 136,000 to 160,000 km (approximately 85,000 to 100,000 miles). This is only a rule of thumb though, the actual lifespan of a wheel bearing depends on the quality of the wheel bearing and the operating conditions.

What is the Subaru rod bearing lawsuit?

Engine Bearings Settlement
This website provides information about a proposed settlement of a class action lawsuit claiming that certain 2012-2017 Subaru WRX and STi vehicles experienced premature connecting rod and main bearing failure.

What is the most common cause of engine bearing failure?

The majority of bearing failures occur because of improper lubrication. Lubrication failure can occur if the wrong lubricant is used, if not enough lubricant is applied, or if the bearing has been exposed to excessive temperatures that have caused the lubricant to degrade. Corrosion & Contamination.

How much does a Subaru wheel bearing cost?

about $350
What’s the cost for wheel bearing replacement on my Subaru. For a national average across all vehicles, the average cost to replace the wheel bearings (for 1 wheel) is about $350 (including parts and labor).

Do Subarus have wheel bearing problems?

Subaru wheel bearing replacement is a common requirement especially for older Subaru models that don’t have the type 2 bearing design.

What damages engine bearings?

Most of engine bearing failures are caused by one of the two factors: – Mixed lubrication with direct metal-to-metal contact between the bearing and crankshaft surfaces; – Fatigue of the bearing material.

What are the first signs of bearing failure?

If your bearing is suddenly noisy during operation, you’re looking at a bearing failure. This excess noise is created when the raceways of the bearing have become damaged, causing the rolling elements to bounce or rattle during rotation.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment