What brake fluid does Ford use?

Ford’s Recommended Brake Fluid
Ford recommends using Motorcraft DOT 4 LV High Performance Motor Vehicle Brake Fluid PM-20 WSS-M6C65-A2 or an equivalent meeting the same specifications, as stated in the 2018 Ford F-150 Owners Manual. The use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards.
It’s important to note that the properties of the recommended fluid and the equivalent are very similar, such as boiling point and moisture absorption. Therefore, it’s crucial to adhere to the recommended specifications to ensure optimal brake performance.
Conclusion
Ford recommends using Motorcraft DOT 4 LV High Performance Motor Vehicle Brake Fluid PM-20 WSS-M6C65-A2 or an equivalent meeting the same specifications for their vehicles.
If you have any more questions or need further assistance, feel free to ask!

Does Ford use DOT 3 brake fluid?

DOT4 brake fluid is not “better” than DOT3, in the same way that diesel is not better than gasoline or jet fuel. They’re different – they have different applications. All these trucks are designed to use DOT3 – that’s what will give the best performance.

Does it matter what brake fluid I use?

Although DOT 3 and DOT 4 fluids are all glycol-based, the chemical composition of each type of fluid is different, so it will have a different effect on the system. To make sure the system works as it should, the best thing to do is to keep using the brake fluid recommended by the manufacturer.

What happens if I mix DOT 3 and DOT 4 brake fluid?

DOT 3 and DOT 4 are both glycol ether based, and will mix just fine. DOT 4 has a higher boiling point, so depending on the application, it may be necessary to use that instead of DOT 3. Do not mix DOT 5 with either of them, as it is silicone based.

Which is better 3 or DOT 4 brake fluid?

Compared to DOT 3, DOT 4 brake fluid has higher wet and dry boiling points, which yields better performance and higher braking temperatures and in high performance applications. Although DOT four is becoming more popular, you’re mainly going to see it in European nameplates.

What vehicles use DOT 4 brake fluid?

BRAKE FLUID DOT 4 is a high-performance poly glycol based brake fluid specially designed for use in disc, drum & Anti-locking Brake Systems (ABS) of any commercial vehicles, passenger cars and motorcycles operating under moderate to severe conditions and requiring a DOT 4 type of fluid.

What is the difference between DOT 3 and DOT 4?

The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.

Is it OK to mix different brands of DOT 3 brake fluid?

2 Answers. tl dr – Mixing Brand X fluid with Brand Y fluid is of no consequence, as long as you are mixing the same grade of fluid (DOT3, 4, 5, or 5.1). In order to be rated at a given grade, it must meet the prerequisites of the grade. This has to do with wet/dry boiling points, not who makes it.

Can you mix DOT 3 and DOT 4?

And Dot 4 are glycol ether-based fluids and the main difference lies in their boiling points DOT. 4 has a higher boiling point meaning it can handle higher temperatures without causing brake failure.

Can I use DOT 3 instead of DOT 4 brake fluid?

Yes. DOT 3 brake fluid is compatible with DOT 4 brake fluid. However, DOT 4 offers a higher boiling point. DOT 5.1 is used in high-performance and heavy-duty applications due to its high boiling point.

What are the disadvantages of DOT 3 brake fluid?

Advantages and Disadvantages
It is suitable for vehicles without ABS, and it is less expensive compared to DOT 4 brake fluid. However, its lower boiling point can lead to becoming ineffective and not compatible with high-performance vehicles and those with ABS systems.