Ford Expedition Brake Fluid Type
The Ford Expedition uses DOT 3 brake fluid, which is a glycol-based brake fluid. It is important to note that the brake fluid cap on the vehicle will specify the type of brake fluid to be used, and it is essential to adhere to the manufacturer’s recommendations. The use of the correct brake fluid is crucial for the proper functioning and maintenance of the vehicle’s braking system.
It’s always a good practice to consult the owner’s manual for specific information regarding the type of brake fluid recommended for your Ford Expedition.
If you have any further questions or need additional assistance, feel free to ask!
Contents
- Does Ford use DOT 3 brake fluid?
- Can you mix DOT 3 and DOT 4?
- What kind of brake fluid does a 2016 Ford Expedition take?
- What brake fluid does a Ford Expedition use?
- Does Ford recommend a specific brake fluid?
- What is the difference between DOT 3 and DOT 4?
- What type of brake fluid does Ford use?
- What happens if I put DOT 3 instead of DOT 4?
- Is it OK to use DOT 3 and DOT 4 together?
- Which is better 3 or DOT 4 brake fluid?
Does Ford use DOT 3 brake fluid?
DOT4 brake fluid is not “better” than DOT3, in the same way that diesel is not better than gasoline or jet fuel. They’re different – they have different applications. All these trucks are designed to use DOT3 – that’s what will give the best performance.
Can you mix DOT 3 and DOT 4?
And Dot 4 are glycol ether-based fluids and the main difference lies in their boiling points DOT. 4 has a higher boiling point meaning it can handle higher temperatures without causing brake failure.
What kind of brake fluid does a 2016 Ford Expedition take?
Brake Fluid
Notes: (1) Motorcraft High Performance DOT 3 brake fluid, P/N PM-1-C or equivalent meeting Ford specification WSS-M6C65-A1.
What brake fluid does a Ford Expedition use?
Prestone – DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 12 oz (Part No. AS400)
Does Ford recommend a specific brake fluid?
Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry.
What is the difference between DOT 3 and DOT 4?
The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.
What type of brake fluid does Ford use?
DOT 4
Hydraulic fluid in DOT 4 quality for brake and clutch systems of motor vehicles.
What happens if I put DOT 3 instead of DOT 4?
Nothing bad will happen to the brake system itself. DOT 3 and DOT 4 are compatible. However, DOT 4 has a higher boiling point than DOT 3. That your car requires it suggests its braking system will be worked hard enough to boil DOT 3 brake fluid.
Is it OK to use DOT 3 and DOT 4 together?
For example, a braking system that has a brake fluid DOT 3 specification can use a DOT 4 or a DOT 5.1 fluid. Also, a system with a DOT 4 can be topped up with a DOT 5.1 without bleeding the system. However, never top up a DOT 4 system with a DOT 3 brake fluid.
Which is better 3 or DOT 4 brake fluid?
Compared to DOT 3, DOT 4 brake fluid has higher wet and dry boiling points, which yields better performance and higher braking temperatures and in high performance applications. Although DOT four is becoming more popular, you’re mainly going to see it in European nameplates.
