Brake Fluid for Acura TSX
The Acura TSX uses DOT 3 or DOT 4 brake fluid. The brake fluid recommended for the Acura TSX is usually engraved in the cap of the master cylinder reservoir. If not found there, it’s advisable to check the owner’s manual of the TSX for the specific recommendation.
It’s important to note that brake fluid types 3, 4, and 5.1 can be mixed freely with each other without any problem. While the Acura brake system was designed around type 3, there is nothing wrong with using type 4 or 5.1 in a daily driver. However, it’s recommended to use the specific brake fluid type recommended for the Acura TSX to ensure optimal performance and safety.
When it comes to purchasing brake fluid for the Acura TSX, there are various options available, including products from trusted brands like Prestone. The price for Acura TSX brake fluid products starts from as little as $6.49, and they are available for shipping or in-store pick up.
In summary, the Acura TSX takes DOT 3 or DOT 4 brake fluid, and it’s advisable to use the specific brake fluid type recommended for the vehicle to ensure proper performance and safety.
If you have any further questions or need additional information, feel free to ask!
Contents
- What is the difference between DOT 3 and DOT 4 brake fluid?
- Do I need DOT 3 or DOT 4 brake fluid?
- What happens if I put DOT 4 instead of DOT 3?
- Is Acura TSX a VTEC?
- What kind of brake fluid does Acura use?
- Does Acura TSX need premium gas?
- What type of oil does Acura TSX use?
- Which is better DOT 3 or DOT 4 brake fluid?
- How do you check the brake fluid on a Acura TSX?
- Does it matter what brake fluid I use?
What is the difference between DOT 3 and DOT 4 brake fluid?
DOT 3 and DOT 4 brake fluids are glycol-based. They’re used in most modern cars and trucks, because they work with ABS brakes. DOT 4 has a higher boiling point than DOT 3. You can use DOT 4 where DOT 3 is called for, but not the reverse.
Do I need DOT 3 or DOT 4 brake fluid?
The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.
What happens if I put DOT 4 instead of DOT 3?
They’re used in most modern cars and trucks, because they work with ABS brakes. DOT 4 has a higher boiling point than DOT 3. You can use DOT 4 where DOT 3 is called for, but not the reverse. Using DOT 3 in a DOT 4 brake risks boiling the brake fluid.
Is Acura TSX a VTEC?
The K24A2 engine used in the TSX was related to the engine in the Honda Accord (7th generation), the Honda CR-V, and the Honda Element. The K24A2 featured intelligent variable valve timing (i-VTEC) and produced 200 hp (149 kW) in this iteration.
What kind of brake fluid does Acura use?
You’ll find formulations that are typically glycol-ether based, but you may also encounter silicone-based (DOT-5) and mineral oil-based (LHM) options.
While modern vehicles, Acuras included, are equipped with knock sensors to prevent pre-ignition, using premium gas becomes essential for unlocking the full performance potential. Acura vehicles, renowned for their high performance, often feature turbocharged or supercharged engines with a higher compression ratio.
What type of oil does Acura TSX use?
Information
| CL | 2003: 5W-20 (S/UFS), topped off with 0W-20 (UFS) |
|---|---|
| TLX | 2015-2020: 0W-20 (UFS) |
| TSX | 2004-2008: 5W-30 (S/UFS) 2009-2010: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2011-2014: 0W-20 (UFS) |
| ZDX | 2010-2013: 5W-20 (S/UFS) |
Which is better DOT 3 or DOT 4 brake fluid?
The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.
How do you check the brake fluid on a Acura TSX?
Check Brake Fluid in Three Easy Steps
- Locate your vehicle’s brake fluid reservoir on the master cylinder under the hood. If you’re unsure where this is, consult with your owner’s manual.
- Outside of the reservoir, there should be “minimum” and “maximum” lines. Check the brake fluid against these lines.
Does it matter what brake fluid I use?
Although DOT 3 and DOT 4 fluids are all glycol-based, the chemical composition of each type of fluid is different, so it will have a different effect on the system. To make sure the system works as it should, the best thing to do is to keep using the brake fluid recommended by the manufacturer.
